M.2 and PCI Express Mini Card (mPCIe) Analog Multifunction Cards

ACCES I/O Products announces the immediate release of two new embedded PCI Express-based families of high performance and low-cost analog I/O cards – the mPCIe-AIO Family and the M.2-AIO Family.

These innovative families of 16-bit and 12-bit ADC cards start with the flagship models, the mPCIe-AIO16-16FDS and the M.2-AIO16-16FDS (NVME compatible!).

Ethernet I/O Products – Use your PCs Network or ethernet connection for a broad range of ethernet-based I/O.

Acces I/O products are designed to cover the most common industry applications. Their full selection of analog, digital, and serial I/O products with Ethernet connectivity allows for easy, simple to use data acquisition and control. Configure an IP-address and quickly acquire and output data over your network.

Applications include machine monitoring, process control, industrial automation, embedded OEM, and more. Acquire, process, store and share data such as temperature, pressure, and flow rate. Input voltages, 4-20mA signals, RTDs, thermocouples and more can now be used, monitored and controlled from any Ethernet network.

ISA Bus and Other Legacy Products

ACCES has been designing Data Acquisition and Control (DAQ) products for more than 20 years, and in that time has seen many changes. Technologies that were once dominant fade into near oblivion, and the trend continues.

This page lists all of the products they’re still proud of, but which time has, for the most part, rendered less-than-suitable for new customers. ACCES will continue to support these products for many years to come, but they can’t recommend them for new projects…

Remote Data Acquisition – Advanced Connectivity Options

Sometimes your sensors or the piece of equipment you are trying to control is not in a convenient place to have a PC close by. The sensors may be widely distributed through out your plant and it just wouldn’t be cost effective to run all your wiring to where the PC is.

In addition, low level signals are more accurately acquired when digitized close to the signal source. In all these cases our REMOTE ACCES line of products will help. The REMOTE ACCES pods are intelligent, sensor to computer interfaces. Each pod can be used as an autonomous data logger to acquire data for later download. Or as many as 31 pods may be connected on a single two wire multidrop RS-485 network allowing a cable distance of up to 4000 ft.

You can also go wireless and extend your range by adding RS-485 wireless transceivers to your serial port. Each unit comes in a rugged NEMA 4 enclosure and can withstand harsh industrial and marine environments.

Digi Resource Library

Simplifying access to many systems with one interface

Learn from the City of Morro Bay’s dynamic operations and see how your systems could be adapted for real-time data.
Managing multiple control systems doesn’t have to be a headache. When Operational Technology Specialist Grant Chase went to work in Morro Bay, California, he found a utilities infrastructure in need of unification and stability.

The city’s water and wastewater control systems were a patchwork of different technologies—some dating back decades.

Grant was determined to rebuild a standardized operation with key security controls in place to protect critical infrastructure. See how edge controller technology played a prominent role in getting operators working smoothly on one platform to visualize data across all processes.

The City of Morro Bay is a popular coastal community that handles seasonal surges of tourists. For its Public Works Department, this means adapting to seasonal water usage spikes, safeguarding against saltwater intrusion, and ensuring access to clean, reliable water for both residents and visitors.

Producers and Suppliers of Biomedical Test Equipment

Meriam Oil and Gas Products

Meriam products have been used extensively in the Oil & Gas industry for most of our 100 year history. Originating with our mechanical manometers, progressing into the most complete offering of averaging pitot tubes mounted to the transmitter of your choice, to intrinsically safe calibrators and HART® communicators. Culminating in the recent release of the 5150, the first HART® communicator to comply with HART® Foundation SDC-625 where it can communicate with any HART® device without the need for DD translations.

SNAP 2-Axis Quadrature Position Input Module

A discussion with Industrial Cybersecurity Pulse about edge devices and cybersecurity

Industry 4.0 and edge computing concepts are becoming more commonplace in a variety of industries. Data democratization is key for companies taking on their digital transformations. But along with these advancements come extra security risks. 

How can you address cybersecurity threats for these devices on the edge of your networks? We have some thoughts on that, and Josh Eastburn shared some insights when he recently sat down with Gary Cohen, senior editor at Industrial Cybersecurity Pulse.

Hospital-Grade Isolation Transformers

Application Note: Filtering in Signal Conditioning Modules, SCMs

LITEMAX® Industrial Display solution provide a wide range of reliable displays from 5.7″ to 85″ including LCD panel modules, open frame LCD displays, outdoor displays, and panel mount monitors to fulfill various application needs. In addition, LITEMAX have developed and focused on LCD display technologies such as high brightness technology, optical bonding solutions, and colour enhancement technology that bring more add-on value to enhance our LCD monitor, all these features can make our LCD panel work perfectly in various environments.

DG70000 Series – RIGOL Waveform Generators

Next-Generation Performance.

The DG70000 series is a high-performance arbitrary waveform generator offering banner specifications that include 12 GSa/s sampling rate (interpolated), 5 GHz analog bandwidth, and 1.5 Gpts/CH (or 4 Gpts single channel) waveform length. Additionally, the system provides 16-bit vertical resolution and -70 dBc SFDR (spurious-free dynamic range) for cleaner and purer signal generation. The DG70000 is a feature-rich system, enabling the creation of advanced sequences for user-defined long complex waveforms. It supports high-precision multi-channel synchronization, and the output of high-bandwidth, low-jitter waveforms, making it ready for applications in areas like communications, and scientific research.

RaspberryPi – EtherCAT I/O Solutions

The Imaging Source – Industrial Camera Manufacturer

Established in 1990, The Imaging Source is one of the leading manufacturers of industrial cameras, frame grabbers and video converters for production automation, quality assurance, logistics, medicine, science and security.

Their comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.

Opto 22 builds the world’s most reliable SSRs

Power Series SSRs offer a wide variety of voltage (110-575 volts) and current options (3-45 amps).

• AC series have a built-in snubber and zero-voltage turn-on; transient-proof models are available.
• DC series offer isolated DC control and are RoHS compliant. Models with LEDs are now available.​

Z Series SSRs are low-cost, 10 amp SSRs with tool-free quick-connect terminals.

Printed Circuit Series SSRs mount on circuit boards and control up to 4 amps.

• MP series have a minimum footprint.
• P series are low profile.

Heat Sink Series SSRs make installation easier with an integral heatsink.

For decades, Sanlien has been designing and developing real-time seismological networks on both domestic and international levels. We offer turn-key seismic monitoring solutions to customers around the world.

Earthquake Early Warning System

Every second counts. The Earthquake Early Warning System (EEWS) developed by Sanlien can detect earthquakes before they arrive. The advance warning allows people to take action to escape from disasters.

Structural Health Monitoring in Buildings

Building Structural Health Monitoring (SHM) is a vital discipline in civil engineering, focusing on assessing and monitoring the safety, condition, and performance of structures like buildings and bridges. SHM uses real-time data, including factors like vibrations and strains, to detect issues, predict problems, and inform maintenance decisions for these structures, ensuring their longevity and safety in an ever-advancing technological landscape.

Geotechnical Solutions – Enhancing Slope & Landslide Monitoring with NB-IoT Technology

Geotechnical monitoring is vital for slope and landslide safety, and the integration of Narrowband Internet of Things (NB-IoT) technology has transformed this field. NB-IoT enables efficient real-time data collection and analysis, ensuring early detection and rapid response to geotechnical challenges. Explore the significance of NB-IoT in safeguarding communities and infrastructure from natural terrain instability threats.

Introduction to Vibration Control Curve in Industrial Plants

The Vibration Control (VC) curve is a vital tool used in the analysis of vibration-sensitive instruments, particularly in industrial settings. It represents the vibration response of instruments or machinery across different frequencies. By plotting vibration amplitude against frequency, engineers and researchers can understand how different components within a system respond to varying frequencies of vibration. This information is critical for ensuring the proper functioning and longevity of sensitive equipment.

In summary, the VC curve and the broader practice of monitoring industrial plant vibrations are indispensable for maintaining efficient, safe, and reliable operations. Through continuous monitoring and analysis, industries can prevent disruptions, enhance productivity, save costs, and ensure the safety of both equipment and personnel.

IT8200 Regenerative AC/DC Electronic Load

IT8200 Series is a regenerative programmable AC/DC electronic load. It is power regenerative, which not only saves electricity and cooling costs for you, but also good for energy saving and environmental protection. AC load mode supports both rectification andnon-rectification, providing CC/CR/CP/CS/CC+CR/CE operating modes. It can simulate multiple circuit topologies under CE mode such as single-phase rectification RLC Circuit and parallel RLC Circuit.

IT8200 can be applied to the test of V2G, EVSE, PCS, UPS, inverter, etc. IT8200 Series adopt a high power density design, and the power can reach 15kVA in a 3U unit. After parallelconnection, the power can be extended to 960kVA at most.Its LCD touch screen with graphical UI interface can directly define differentwaveforms. Combined with arbitrary waveform editing function and perfect protection function, it is an ideal choice for R&D testing andsystem construction.

10 Gigabit PoE Switches

Antaira’s industrial 10 gigabit PoE switches are compliant with the Institute of Electrical Electronics Engineers’ (IEEE) code 802.3at/af and have 30 Watts per port. Antaira’s 10 Gigabit PoE managed Ethernet switches have dual-rate (1G/10G) SFP+ slots for fiber connection.

These 10 Gigabit options are ideal for high bandwidth support to applications requiring greater speeds of connectivity. These Ethernet switches are pre-loaded with the standard Light Layer 3 network management software. Our 10 gigabit PoE switches are built for extreme and demanding operating environments, such as manufacturing facilities, outdoor locations, mining and gas, power facilities, and similar environments.

Axiomatic Product Range

Automation:

• Analog and Digital I/O
• Engine Controls & Temperature Monitoring
• Hydraulic Valve Drivers & Controllers
• Signal Converters & Conditioners

Power Management

• DC/DC Converters
• AC/DC Power Supplies
• Battery Chargers
• Motor Drives & Controllers
• Surge Protectors

Connectivity

• Vehicle and Engine Protocol Converters, Gateways, and Routers

Machine Control

• Machine Control Systems, Inclinometers, and Level Sensors

MSR Datalogger Range

Are you looking for a compact data logger with a large memory to handle a wide variety of measurement tasks such as measuring and recording shocks, vibration, temperature, humidity, pressure or light?

Use the quick search tool and find the right data logger! …

Ultrasonic Thickness Gauges

The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001”.

Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC’s, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications.