IT2800 Graphical Source Measure Unit

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions).

This ensures the independent measurement of IV characteristic in 4-quadrant. With a current range of 10fA to 10A and a voltage range of100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors in measurement results due to the device’s own heating.

IT-N2100 Series Solar Array Simulator

IT-N2100 series solar array simulator is a high performance DC power supply with fast change of IV curve. It can simulate the IV output characteristics of various solar panels under different environments (temperature, light, shadow decay, aging).

It can be applied for the tests of solar micro-inverter, power optimizer, satellite power system, sail power array and so on. IT-N2100 solar array simulator has low ripple, low noise and fast MPPT, supports multi-channel synchronous control and high voltage topology.

IT6600D Series High Power Programmable DC Power Supply

IT6600D series DC power supply is a new generation DC power supply. Its touch screen and intuitive GUI not only simplify parameter setting and waveform editing, but also improve convenience.

It adopts advanced third-generation SiC technology. A 3U height single unit can output 21kW each in dual channels. If the two independent channels are connected in series/parallel, it can reach maximum power 42kW. Since 1 unit IT6600 can cover the output range of 3-5 normal power supplies, it can be applied to various applications requiring high voltage or high current.

IT-M3140 Programmable DC Power Supply

IT-M3140 Programmable DC Power Supply is specially designed for testing, production, R&D lab and ATE integration. It is only 2U half rack, but can output power up to 1850W and 3000W, and voltage output from 30V to 1200V. It has three output modes of constant voltage, constant current and constant power. Automatic wide-range output enables it to achieve a wider output voltage and current range at full power output, meeting a wider range of testing requirements and greatly saving equipment purchase costs.

Not only that, IT-M3140 is a DC power supply integrating high stability, fast response (<1ms), high-level protection functions and LIST programmable functions. This series is equipped with a standard USB/LAN interface, and can be used with ITECH’s free PV3140 software to easily realize remote control and data storage, and is easy to integrate.

IT6600C Series Bidirectional Programmable DC Power Supply

IT6600C series DC power supply is a new generation graphical bidirectional DC power supply. It adopts a touch screen design and intuitive GUI, making parameter setting and waveform editing simpler and more efficient. It adopts advanced third-generation SiC technology.

A 3U height single unit can output 21kW each in dual channels. If the two independent channels are connected in series/parallel, it can reach maximum power 42kW. Since 1 unit IT6600C can cover the output range of 3-5 normal power supplies, it can be applied to various applications requiring high voltage or high current.

IT6400 Bipolar DC Power Supply / Battery Simulator

The unique bipolar voltage/current output makes IT6400 series can be used as a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products. IT6400 has ultrafast transient time less than 20 μs and resolut ion up to 1 nA.

Its new designed speed shift mode achieves volt age/current fast rising and without overshoot, the rising time up to 150μs. Mean while, the waveform display function let the test be visible and simple. IT6400 series can be widely used in portable battery-operated products test, mobile power pack test, LED test and other fields.

IT-N6300 Series Triple-Channel Programmable DC Power Supply

The IT-N6300 Series is a high-performance triple-output DC power supply from ITECH, housed in a compact 2U half-rack chassis. Each channel operates independently, with series/parallel and synchronization capabilities for versatile testing needs. A 4.3-inch high-resolution LCD offers intuitive control for parameter setting, test programming, and waveform monitoring. High-resolution output (1 mV/0.1 mA) ensures precise voltage and current delivery.

With low ripple, CC/CV priority modes, and FOLDBACK protection, the IT-N6300 ensures stable and safe operation. Flexible control options, including panel and remote programming, simplify system integration. Ideal for labs, manufacturing, and communications testing, the IT-N6300 combines precision, reliability, and efficiency for advanced power management.

ITECH IT6600C Wins Gold Again

ITECH IT6600C Bidirectional Programmable DC Power Supply won the Gold Award in the Test & Measurement category of the 2024 LEAP Awards, a prestigious U.S. award that recognizes advances in the fields of electronics, software, test and measurement, and industrial automation, and showcases both established and emerging products that have made significant contributions to the discipline of engineering.

ITECH was selected from four finalists, and the IT6600C was the only product to win a Gold Award in the category due to its outstanding technical performance. This award once again highlights ITECH’s innovative strength and leadership in the testing field.

Itech Latest News

Awards and Shows!

Itech New Products

Itech Technical Articles

Itech Product Applications

See the Itech products put to good use in these application stories.

Itech Manuals and Videos – look before you buy

Medical Electronics

With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI, and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market.

At the same time, the growth of market demand has greatly stimulated medical electronic equipment manufacturers to expand investment and create innovations in this field. ITECH has been following the development of the medical electronics industry, providing you with high precision, high speed, high power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other test instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronic applications.

Try before you buy

Loan from MasTec – Opto22 groov EPIC Learning Centre

If you’ve been sitting on the fence about implementing groov EPIC in your business – MasTec has a groov EPIC Learning Centre available for loan.

Contact us today to experience the power, possibilities and benefits of this amazing technology.

OPTO22 Resource Videos

Resource and Tools – Explore the huge range of videos

Edge Programmable Industrial Controller

It’s a PLC! It’s a PC! It’s a smartphone! No, it’s the industrial controls system you’ve been waiting for: Opto 22’s groov EPIC—the world’s first Edge Programmable Industrial Controller.

Get OT data to on-premises and cloud applications—no PLC or PC needed.

• Universal I/O
• Power and energy monitoring
• Goes anywhere
• Collect and publish data the way you want
• Use the power you already have
• Keep your data secure
• Configure like a pro

Are you working on machine health initiatives and predictive maintenance?
Do you want to track (and reduce) operating costs?

groov products offer a simple, flexible, industrial way to monitor power and energy where it’s used and securely send that data where it’s needed for analysis and decision-making.

Easily build your HMI, then view, monitor, and control data from PCs and mobile devices anywhere.

Product Manuals

Downloadable Product manuals

Download and read online the technical documentation for The Imaging Source Windows and Linux software products and tools.

• Software Development Kits (SDKs)
• End User Software
• GStreamer Plugins
• Third-Party Software Integration
• Archive

For decades, Sanlien has been designing and developing real-time seismological networks on both domestic and international levels. We offer turn-key seismic monitoring solutions to customers around the world.

Earthquake Early Warning System

Every second counts. The Earthquake Early Warning System (EEWS) developed by Sanlien can detect earthquakes before they arrive. The advance warning allows people to take action to escape from disasters.

Structural Health Monitoring in Buildings

Building Structural Health Monitoring (SHM) is a vital discipline in civil engineering, focusing on assessing and monitoring the safety, condition, and performance of structures like buildings and bridges. SHM uses real-time data, including factors like vibrations and strains, to detect issues, predict problems, and inform maintenance decisions for these structures, ensuring their longevity and safety in an ever-advancing technological landscape.

Geotechnical Solutions – Enhancing Slope & Landslide Monitoring with NB-IoT Technology

Geotechnical monitoring is vital for slope and landslide safety, and the integration of Narrowband Internet of Things (NB-IoT) technology has transformed this field. NB-IoT enables efficient real-time data collection and analysis, ensuring early detection and rapid response to geotechnical challenges. Explore the significance of NB-IoT in safeguarding communities and infrastructure from natural terrain instability threats.

Introduction to Vibration Control Curve in Industrial Plants

The Vibration Control (VC) curve is a vital tool used in the analysis of vibration-sensitive instruments, particularly in industrial settings. It represents the vibration response of instruments or machinery across different frequencies. By plotting vibration amplitude against frequency, engineers and researchers can understand how different components within a system respond to varying frequencies of vibration. This information is critical for ensuring the proper functioning and longevity of sensitive equipment.

In summary, the VC curve and the broader practice of monitoring industrial plant vibrations are indispensable for maintaining efficient, safe, and reliable operations. Through continuous monitoring and analysis, industries can prevent disruptions, enhance productivity, save costs, and ensure the safety of both equipment and personnel.

Digilent is the official Education and Teaching Brand of NI

At Digilent, their mission has always been—and still is—to make engineering technologies understandable and accessible to all.

They provide educators and students with low-cost, fundamental tools and curricula to turn this mission into reality. Products like the Analog Discovery 3 mixed-signal oscilloscope, or the entry-level Basys 3 FPGA development board put the hardware in the student’s hands for maximum engagement and growth — in either a traditional classroom setting, hybrid, or remote.

“If you are an electrical engineering student, the Analog Discovery 3 is an absolute must have. Practical enough to be portable but as powerful as any instrumentation system you’ll ever need. I love how easy the WaveForms software is for controlling the AD3. It’s a buy you don’t have to think twice about.”
– University Student

Antaira Industrial networking POE Literature

Explore downloadable literature:

Booklets:

• PoE
• ITS 
• Water/WasteWater
• Automation
• Oil & Gas
• Security
• Wireless

Plus fliers and brochures

Machine Electro Hydraulic System 

New Products

MSR Data Logger Selection According to Measurement Parameter

What would you like to measure?

Data loggers are data recording devices which record and store physical measurement data such as acceleration, temperature, humidity, pressure, vibration and much more with the help of sensors. Most MSR data loggers are modular and can be equipped with up to five different sensors. With the sensors you have the choice between internal and external sensors, allowing measurements in difficult to access places. You remain particularly flexible in the applications if you use a data logger with pluggable, interchangeable FlexSensors.

Which data logger is best suited for my measuring task?

Use our data logger quick search

Force Gauges

Phase II force gauges can be used in all types of tension and compression force testing applications. All force gauges are able to capture the peak force in both tension and compression and have both inch/metric units of measurement on dial face. Force gauge capacities are available from 2lbs to 100lbs. Phase II force gauges may be handheld or used with a force test stand and gripping fixtures for greater versatility.