Electrical Safety Analyzers are used for a staggering number of applications, so why be stuck with one model available. Our five base models allow you to pick what you need and save some money at the same time. Need communications? RS232 is now available on ALL models. Doing International testing? Our INTL versions work worldwide.
Safety Analyzer – Australian – 10 Lead w/ Sim
SA-2010S-AUS
The BC Biomedical Model SA-2010S Series is a microprocessor-based Electrical Safety Analyzer with a built in Patient Simulator. It allows for a multitude of tests to be performed on a device using the same unit and lead connections. It provides a full Electrical Safety Analyzer, ECG Simulation with four waveforms with constant QRS duration and six machine performance testing waveforms. There is patient lead testing for 10 inputs.
SA-2010S Series Basic Features:
- Led status indicators
- Audio feedback
- Touch control keys no knobs
- 10 universal patient lead inputs
- High impact plastic case
Safety Analyzer Capabilities:
- Line voltage measurement
- Device under test current measurement
- Earth / ground lead resistance
- Earth / ground leakage current
- Enclosure / chassis leakage current
- External resistance
- External leakage current
- Source receptacle wiring integrity monitor
- True RMS measurements
- AAMI ES1-1993 or IEC 601 selectable test loads
- 85 to 265 VAC operation
- Full 20 amp rating
- Self test points
- Externally replaceable ground fuse
- Automatic load reversal delay
- Patient lead to lead leakage current
- Patient lead to earth / ground leakage current
- Patient isolation leakage current
- External isolation leakage current Patient Simulator Capabilities:
- Sine: 10, 60 AND 100 HZ
- ECG: 30, 60, 120 AND 240 BPM
- Square: 0.125 AND 2.0 HZ
- Triangle: 2 HZ
- High level output (1 V p-p)
- Amplitude accuracy: +/- 2%
- Frequency accuracy: +/- 0.5% SA-2010S-R:
- RS-232 Serial Communications
