Itech Instruments

Your Power Testing Solution

Itech make your dream real with intelligence, technologies, eco-friendly concept, creativity and high performance.

2026 Catalogues

Recommended Reading

Itech History
View Solutions

Products

IT2800 Series Graphical Source Measure Unit

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions).

This ensures the independent measurement of IV characteristic in 4-quadrant. With a current range of 10fA to 10A and a voltage range of100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors in measurement results due to the device’s own heating. Excellent Front Panel GUI with 5 inch touch display supports various view modes, to help engineers significantly improve the efficiency of testing. The IT2800 Series is suitable for a variety of test applications: discrete semiconductor devices, passive devices, transient suppression devices, laser diodes, TVS, varistors, etc.

IT2800 Series Catalogue

Solar Array Simulator

Bidirectional DC Power Supply

  • IT6600C Bidirectional DC Power Supply (42~420kW10MW+)
  • IT-M3900B Series Regenerative power system
  • IT-M3900C Bidirectional Programmable DC Power Supply
  • IT-M3400 Bidirectional DC Power Supply
  • IT-M3600 Regenerative Power System
  • IT6000B Regenerative Power System
  • IT6000C Bidirectional Programmable DC Power Supply

High Precision DC Power Supply

  • IT-N6900 Programmable DC Power Supply
  • IT-M3200 High Precision Programmable DC Power Supply
  • IT6400 Series Bipolar DC Power Supply / Battery Simulator
  • IT6900A Series Wide-range Programmable DC Power Supply
  • IT6100B Programmable DC Power Supply

Lower Power Bench DC Power Supply

  • IT-M3140 Programmable DC Power Supply
  • IT6800A/B Dual-range Programmable DC Power Supply
  • IT6800A/B Single Channel Programmable DC Power Supply
  • IT6800 Series High Performance DC Power Supply
  • IT6700H Series High Voltage DC Power Supply
  • IT6700 Series Digital-control DC Power Supply

IT-M3900D

High Power DC Power Supply

High Power DC Power Supply

  • IT6600D High Power DC Power Supply (42~420kW…10MW+)
  • IT-M3900D High power DC Power Supply
  • IT6000D Series High Power Programmable DC Power Supply
  • IT6500 Series Wide-range High-power DC Power Supply

Multichannel DC Power Supply

  • IT2705 Modular DC Power Analyzer 
  • IT-N6300 Triple-Channel DC Power Supply (245W-445W) 
  • IT2700 Multi-channel Modular Power System (1U 8 channels, 200W and 500W) 
  • IT2700 Multi-channel Modular Power System (1U 8 channels, 200W and 500W) 
  • IT-M3100D Dual-channel Programmable DC Power Supply
  • IT-M3100 Ultra-compact Wide Range DC Power Supply
  • IT6300 Triple Channels DC power supply

IT-M3200

High Precision Programmable DC Power Supply

IT6000C

Bidirectional Programmable DC Power Supply

IT-6700H Series

High Voltage DC Power Supply

IT-M3100D

Dual-channel DC Power Supply

IT9100 Power Meter

The IT9100 power meter can provide the maximum input of 1000 Vrms and 50 Arms and measurement bandwidth of 100 KHz, and can be easily used for measuring the voltage, current, power, frequency, harmonics and other parameters. The standard configuration includes USB, RS232 and LAN communication interfaces and also interfaces for USB-based peripheral devices.
Users can save the measured parameters into the external storage medium. The basic voltage and current accuracy is 0.1%. Moreover, the power meter has rich integrating functions, such as the active power. It is widely applied in test of motors, household appliances, UPS, etc.

IT8200E 

Regenerative AC/DC Electronic Load

IT5100 Battery Tester

IT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 ??, voltage resolution is 10 ?V. Combined with external USB disk, IT5100 is available for long-term statistics calculation.

Built-in comparator function, IT5100 can automatically determine whether the battery parameters meet the standards and count pass rate, which is suitable for a variety of battery`s test and pick. Built-in USB / LAN communication interface to support SCPI communication protocol.Single unit of IT5102 support 16 channels batteries measurement, master- slave connection up to max.17 sets and extension channels quantity up to 272, that greatly improves testing efficiency. Built-in LAN / RS232 communication interface, IT5100 series can be widely applied in cellphone lithium batteries,electric vehicle batteries and other batteries inspection and sorting.

IT5100 Series Catalogue

Test System

ITS5300 Battery Charge and Discharge Test System

ITS5300 battery charge and discharge test system is designed for a variety of power batteries (lead acid, nickel hydrogen, lithium batteries, super capacitors, hydrogen fuel cells, etc.) for performance testing. ITS5300 test system can be used in performance testing of a hundred or more battery packs or 200 cells in the battery packs at one time, remarkably improving the testing efficiency and capacity of the production line.

ITS5300 test system consists of ITECH power supply, electronic load, internal resistance tester, temperature acquisition and other products with professional battery test software components, high degree of automation and high stability. ITS5300 is the best choice for user testing.

ITS5300

Battery Charge & Discharge Test System