Single Phase to Three Phase Converters

 1/ Eurotech Booster™ E

The single phase input is 240V.
415V two- and 480V split-phase supply is included.
The output voltage is 415V three-phase, pure sine wave. The symmetry is not electronically controlled as with a Booster C or T. The imbalance is up to + - 9%. This is acceptable for motors under medium load but not with machines with VFDs or inverters or CNC machines or welders.

View Datasheet PDF

Install Booster

 2/ Eurotech Booster™ C

The output voltage symmetry is digitally controlled and continuously adjusted in two steps for use with sensitive equipment such as CNC machines, inverters, VFDs, welders,
air conditioning, plasma cutters and similar. Under nominal load the output voltage symmetry is better + - 6%.

 

View Datasheet PDF

Install Booster

 3/ Eurotech Booster™ T

The output voltage is 3x 415V pure sine wave. The output voltage symmetry is digitally controlled and continuously adjusted in eight fine steps for use with
sensitive equipment such as CNC machines, inverters, VFDs, welders, air conditioning, plasma cutters and similar.
Under nominal load the output voltage symmetry is + - 3%.

View Datasheet PDF

Install Booster

/ Low cost low power Solid State

Single to three Phase converter - ask for help on these types.

Similar technology to a Variable Speed Drive Controller.

 

 

 5/ Drive Boosters™

Single to three phase converters especially for motors.

Use a single phase motor as an alternator to make one more phase and then synthesis the third from Capacitors



 

 

Interested in a converter to go from 230VAC single phase to 3 phase 415 VACpower that would run a Uni mig welder model KT 50 (input voltage 42-48V50Hz) plus 330S 40A / 16V - 330A / 30.5? ask a MasTec Sales Engineer.

 

Talk to a MasTec Sales Engineer for more details.

                                                                             


© MasTec Ltd 1997- 2021