Power and Energy Monitoring Solutions,



Below are just some of the range offered by Veris, get in touch with a Mastec Engineer to discuss your requirements

High Density

Meters designed to monitor multiple circuits in high density power metering applications.

Branch Circuit Monitors - Solid-core
E30E042 - Advanced Monitoring w/Ethernet: Voltage, Current, Power and Energy for 46 circuits (42 branches, one 3-phase main, one neutral), two strips with 21 ea 100A solid-core CTs with 3/4" spacing, Modbus, BACnet & SNMP communications, 90–277VAC (L-N)
  Branch Circuit Monitors - Split-core
E31E002 - Advanced Monitoring w/Ethernet: Voltage, Current, Power and Energy for two 3-phase mains, two neutrals, and up to 42 branches, Modbus, BACnet & SNMP, 90–277VAC (L-N), ribbon cables sold separately, supports 50A, 100A and 200A CTs sold separately
Multi-Circuit Monitors
E34A04 - Multi-Circuit meter with 4 x 3ph meter, or 12 channels, Modbus RTU only (RS-485)
  Multi-Circuit MonitorsE34E04 - Multi-Circuit meter with 4 x 3ph meter, or 12 channels, Modbus RTU, Modbus TCP, BACnet MST/TP, BACnet IP, SNMP
       

Single Circuit

For applications where independent measurement of single or three phase circuits is needed. Veris provides multiple products designed to meet your application requirements.

E2x Enercept - Flex
E23C5 - Enercept Flex Meter,RS485,Mb/BAC, 3Ph4W IEC (International) Wire Color. Enercept Flex Meter,RS485,Mb/BAC, 3Ph4W IEC (International)Wire Color. (Also available in North & South America wire color)
  E2x Enercept - System Calibrated
E23C5-101 - Enercept System Calibrated 100A,RS485,Mb/BAC, 3Ph4W IEC (International Wire Color). Enercept System Calibrated 100A,RS485,Mb/BAC, 3Ph4W IEC (International Wire Color)
H80xx Enercept 
The perfect product for retrofits as the electronics are embedded in the split core CT. This means the entire assembly is easily mounted inside of the electrical panel eliminating the labor and space required to install a separate transducer box.
H80xx Enercept - Modbus
H8035-0100-2 - KW/KWH only,3 Phase,Modbus,100A,Small CT
  H80xx Enercept - kW Transducers
H8044-0100-2 -100A, 3 CTs for unbalanced 3-phase loads, 480 VAC, small CT, 4-20 mA output.
H80xx Enercept - kWh Transducers
H8053-0100-2 - 100A, 3 CTs for unbalanced 3-phase loads, 208/480 VAC, small CT, pulse output.
  N2 Protocol
H8025-0800-4 - KW/KWH Only, 3 Phase,N2,800A,Large CT
       

H81xx Enclosed

The H8100 series provides excellent systems accuracy with a large back-lit display.

Enhanced
H8163-0100-0-1 - Energy Meter, 100A, One micro CT, 120-480 VAC, pulse and phase loss output.
  Energy Display
H8150-0100-0-1 - Energy Meter, 100A, One micro CT, 120 VAC L-N, display only.
  Comms Cards
H8126-CB - Energy meter communications board, N2 protocol.
   
       
 H84xx Performance Panel H8436V
Power Meter, Panel mount, 120-480 V, Modbus output, FDS.
  H8436VB
Power Meter, Wall mount, 120-480 V, Modbus output, FDS.
       
E50 Series Power & Energy Meter BACnet
E50H2 - DIN-mount Energy Meter with BTL-certified BACnet MS/TP serial communication. Includes one pulse input and an alarm output.
  Modbus
E50C2A - DIN-mount Energy Meter with Modbus RTU serial communication for use with E683-Series OR U018-Series rope-style CTs. Includes Watt-hours pulse and alarm outputs.
  Pulse
E50B1 - DIN-mount Energy Meter with Watt-hours pulse, VAR-hours pulse and alarm outputs.
  LON
E50F2A - DIN-mount Meter with LON FT-10 serial communication for use with U018-Series rope-style CTs. Includes one pulse input for other Energy Sensors and an alarm output.

Back to Veris Home

Talk to a MasTec Sales Engineer

   
© MasTec Ltd 1997- 2019