Power Newsletter - December 2020

Unmatched High Power Technology

DC High Power Supplies


ITECH IT-M3200 High Precision Programmable DC Power Supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.

1U Half-rack, maximum power is up to 360W
Wide range measurement
Low ripple and noise
High resolution, high accuracy and high stability
Current readback is up to 10nA
Four current measurement ranges Low/Middle/High/Auto
CC/CV priority setting
Adjustable rise/fall time, soft start / stop
Independent control of multiple channels, up to 16 channels

IT6700H Series High Voltage DC Power Supply is with maximum output power 3000W, adjustable voltage 0-1200V and current 0-10A, IT6700H series have desktop and shelves installation function, easy to operate. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions facilitate the formation of a variety of intelligent test platforms. IT6700H can accurately describe the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system, etc., which need to use high voltage and low current DC power supply.

Voltage up to 1200V
VFD display
Various models for high voltage or high current are Optional
Output switch ON/OFF control
Safety terminal
List mode, editable waveforms of voltage and current
Remote sense
Built-in RS232/USB/GPIB *1
*1:IT6722A is without GPIB interface


IT6000D Series High Power Programmable DC Power Supply, is applicable in laboratories and automatic test system to provide high-power and stable DC supply. The feature of autoranging output enables a wide range of voltage and current combinations at full power, unprecedentedly flexible. IT6000D Series has wide range of applications and its single unit provides power range of 6kW to 144kW, current up to 2040A, as well as its voltage up to 2250V. Besides, IT6000D provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.

Single unit provides voltage of 80V-2250V, current of 30-2040A, power of 6kW -144kW, and 73 standard models are available
Master-slave parallel, the power can be paralleled up to 1.152 MW
Current is up to 2040A by paralleling
The adoption of high frequency switching structure supports the automatic switching between CV and CC
Provides various protections: OVP, OCP, OPP, OTP, protection of power failure and UVP
Supports data recording function, can continuously record the Max, Min, Average values of output voltage and current, and it can automatically execute data by sequence
Power efficiency up to 95%
High power density of 18kW in 3U
Supports external data recording function, internal buffing, and the PC will periodically read data from the power supply
Built-in communication interfaces of USB/CAN/LAN/Digital IO, and optional interfaces of GPIB, Analog and RS232
Supports SCPI protocol, built-in Web server

REGATRON's New Generation of Programmable Regenerative DC Power Supplies Is Now Available.

The new G5.RSS series features high control dynamics, an exceptional accuracy, a nominal output voltage of up to 3000 VDC, and a wide current-voltage range with an auto-ranging factor of 3. You get the best value for your investment.

Technologically advanced, fast switching, compact 19-inch power supplies
High control dynamics in the 100...200 µs range – even at higher power levels
Exceptional accuracy of <0.02% FS, additional high-resolution measurement range
Wide current-voltage range with an autoranging factor 3
CV, CC, CP, CR, and Ri-Sim control modes
Regenerative and highly efficient, resulting in significant reduction of energy consumption and heat dissipation

System Capability
Modular and easy scalable systems
Parallel, series, and mixed operation with a digital high-speed bus
Simple master-slave configuration with the operating software
Easy rack mounting
Optional safety features such as 2-channel safety interface and insulation monitoring
Turn-key cabinet solutions or project-specific system integration according to customer


The TC.GSS series is a full bi-directional series of high-power DC source / sink units based on the thousandfold field-proven REGATRON grid-tied technology. The wideband AC input module accepts nearly all AC grid systems worldwide and disposes of an active Power Factor Correction. The novel bidirectional converter architecture allows for very fast and continous "quadrant crossing" between source and sink operation and vice versa, so a full current source to full current sink action takes only some 2-3 milliseconds under ohmic load.

As all REGATRON DC power supplies the TC.GSS series disposes of a multi-processor control architecture, allowing not only for full digital control, but also for Internal Resistance Simulation. Moreover, onboard real-time computation provides the activation of the versatile TopCon Function Engine TFE (optional) as also the universal "Application Area Programming" AAP (optional), which allows to give the source a programmable transfer characteristic or a random two-pole function y = f(x).


Graduated product line: 65 VDC, 130 VDC, 400 VDC, 500 VDC, 600 VDC, higher voltages up to 1500 VDC with series connection or +/-1000V with midpoint earthing.
Power categories of 20 kW and 32 kW are available for each nominal output voltage.
Optional extras like liquid cooling and accessories complete the product line of power supply units.
Modular concept for easy power increase: Parallel, series, matrix or multiload master-slave-operation.
CE conformity


Contact us
for exclusive offer on Diamond's Floyd NVIDIA Jeton Nano and Xavier NZ carrier board and system



Power Newsletter - November 2020



AC and DC Loads and more


Lithium 12 Volt 100Amphr Batteries


All things Power UPS Medical PDU USB Power


Medical Grade Power


Xbee Wireless Comparison Sheet

IIOT > EPIC Linux Real Time Edge Computer


Signal conditioning, data acquisition, and data communication products





Programmable Instruments and Power Sources



IIOT Bluemix IO


DAQ USB, Ethernet, WiFi and Buses


High Powered AC and DC Power Supplies




Industrial IIOT and Automation




MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

Contact a
MasTec Engineer


Custom LabVIEW Development Research & Development Projects

LabVIEW Code Upgrading From LV 6 to Present

Custom LabVIEW Development Modbus ASCII & RTU & TCP

Custom LabVIEW Development RS-232 & RS-485 Instruments





Spot Buying
ODM/OEM Purchases
__ _
All Prices are exclusive of NZ GST
Phone 64 9 273 4200 / Fax 64 9 273 9500

© MasTec Ltd 1997- 2020