_
 
Power Newsletter - November 2020
_

  • All in one design, high efficiency up to 97.8%
  • Home appliance appearance, low DB
  • IP65 Protection, string monitor optional
  • Swappable, commission free
  • CATL Battery Cell, 10000 Cycles, 10 Year lifespan
  • VPP (Virtual Power Plant), APP Monitor

_

 KSE 3.6~5K Series (048)

KSE 3.6~5K Series bidirectional energy storage hybrid inverter can control the flow of energy intelligently and protect against power outage. The PV energy can be provided to the load, fed into the public grid and charge the battery during the daytime. And the energy stored in the battery can be discharged to power the load during night time. The public grid can also charge the battery via the hybrid inverter.

Solution for energy independence
Wall mounted and rack installation (optional)
IP65 protection, highly integrated design,light weight,easy for installation on the site
Operating in either on-grid mode or off-grid mode
Compatible with both lead-acid battery and Li-ion battery
Optimal scheme of battery charging and discharging
Ultra wide MPPT range: 120Vdc - 500Vdc
Fast and easy commissioning via front panel LCD or App
Integrated advanced energy managemenl system, battery usage strategies

_

KSE Series Hybrid Inverter (048S)

KSE Series Hybrid Inverter can control the flow of energy intelligently and protect against power outage. The PV energy can be provided to the load, fed into the public grid and charge the battery during the daytime. And the energy stored in the battery can be discharged to power the load during night time. The public grid can also charge the battery via the hybrid inverter.

Dual MPPT
Compatible with Li-ion and Lead-acid
Inbuilt UPS function
IP65 protection
Integrated EMS via LCD
On-grid and Off-grid mode
Reactive power controller
Export control function

Lithium UPSs + Lithium Home Power

KSTAR is a leading brand in power electronics and new energy products, including data center critical infrastructure (UPS, battery, precision distribution), modular data center solutions, PV and ESS solutions.

BluE-S-5000D Series
All-In-One Single Phase Storage Solution

KSTAR energy storage solution BluE-S-5000D SERIES is the optimal choice for hybrid systems,which is designed with CATL Lithium Ion Battery Solution + KSTAR Inverter Solution. The all-In-one single phase storage solution is safe, reliable and higher yields.

All in one design
High efficiency up to 97.6%
IP65 protection
String monitoring optional
Easy installation
Digital controller
DC/AC Surge protection
Reactive power controller

 If you would like to contact us about any of these products, feel free to email us.

_Line-interactive UPS
 

UA Family 400-3000VA

UA series is a line interactive UPS which is integrated with AC voltage stablizer, standby power, and surge voltage surpression, meanwhile with compact size, full function, high efficiency, high reliability, ease to be used. It can supply comprehensive power protection for termianl equipment, PC, station, SOHO equipments.

AVR boost and buck
Cold start function
Smart RS-232/USB interface for power management
Built-in self-diagnostic function
Modem/LAN internet protection
Generator compatible(Optional)

Modular UPS


Modular UPS-HPM Family

HPM series UPS is developed as a high frequency on line modular UPS for medium and large data center, adopting fully digital control technology, fully guarantee power supply to operate reliably and stably; diversified option of modular power, accurately position user side requirements; flexible redundancy design greatly increase the system availabity, user can realize expansion as demand, and modular structure greatly increase the convenience for maintenance.

Adopting digital control design, and the control system is more reliable
High power density design, capacity of single power module is 6KVA/ 10KVA/ 15KVA/ 20KVA/ 25KVA/ 30KVA/ 40KVA, the height of all these modules is 3U.The power of system ranged from 6KVA to 520KVA corresponds to the number of parallel power modules from 1 to 13
Redundant control system, each power module is equipped independent control system, and control itself independently according to the sharing message, and the fault module separates from the system automatically
Support parallel expansion for cabinet, and parallel expansion is up to 4 cabinets.
Voltage of batteries can be configured flexibly, 1 input 1 output/ 3 input 1 output ±96Vdc/ ±108Vdc/ ±120Vdc (16/18/20PCS) selectable; 3 input 3 output±216Vdc/±228Vdc/±240Vdc (32/34/ 36/38/40PCS) selectable.
Intelligent charging mode, Charging current can be configured , there are 3 charging mode which are constant current mode, constant voltage mode, floating charging mode, and the charging mode can be transfer smoothly.

_

Power Newsletter - Ocrober 2020

_

__

 
AC and DC Loads and more

  

Lithium 12 Volt 100Amphr Batteries

 

All things Power UPS Medical PDU USB Power

  

Medical Grade Power

 

Xbee Wireless Comparison Sheet

 
IIOT > EPIC Linux Real Time Edge Computer

 

Signal conditioning, data acquisition, and data communication products

  

Loggers

  

  

Programmable Instruments and Power Sources

   

 

IIOT Bluemix IO

 

DAQ USB, Ethernet, WiFi and Buses

  

High Powered AC and DC Power Supplies

  

 
 

  

Industrial IIOT and Automation

 
 

 

 Subscribe

MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

_
Contact a
MasTec Engineer
_
_

 

Custom LabVIEW Development Research & Development Projects

LabVIEW Code Upgrading From LV 6 to Present

Custom LabVIEW Development Modbus ASCII & RTU & TCP

Custom LabVIEW Development RS-232 & RS-485 Instruments

_

CHECK OUT OUR OTHER SITES

 

 

Spot Buying
ODM/OEM Purchases
__ _
___
All Prices are exclusive of NZ GST
Disclaimer
Phone 64 9 273 4200 / Fax 64 9 273 9500

© MasTec Ltd 1997- 2020