_
Medical Newsletter - November 2020
_

 

150W Power Inverter/Charger for Mobile Medical Equipment, 230V - IEC 60601-1

Medical inverter/charger with IEC 60601-1 powers equipment used in healthcare facilities inside and outside patient care areas.

All-in-one inverter/charger/controller powers equipment on mobile medical carts
• IEC 60601-1 compliance for use inside and outside patient care areas
Approved to IEC60601-1-2:2014, 4th Ed.
Works with both SLA and LiFePhos batteries to best fit your power requirements
Internal ATS powers connected equipment and recharges battery simultaneously
Free PowerAlert® software protects valuable patient data from loss or corruption

Mobile Power Manager (MPM)

AMETEK Powervar’s Mobile Power Manager (MPM) provides UL 60601 compliance for mobile carts while protecting valuable patient data from being lost or corrupted.

The MPM provides power to connected equipment on a cart for up to 10 hours with a rapid recharge time. Existing non-powered carts can be upgraded at an affordable cost.
The MPM supports multi-battery chemistries, SLA or LiFePO4 batteries.
The MPM power connections and user interface can be custom configured for OEM applications.
The cart can be monitored by the MPM software, which provides information on the condition of the battery to facilitate early warning for battery replacement.
PC-based client software and server-based fleet management software is available to administer your mobile application.

Lithium Medical UPSs and
Lithium powered Medical Inverters

For the inverters MasTec can supply Lithium Battery Packs.

• Approved for Use in Patient Care Vicinities
• Reduce Cumulative Shock Potential to Less than 100µA (Full Isolation)
• Lead Acid & Lithium Battery Technology

Medical-grade UPS systems provide medical-grade regulatory compliance for connected equipment. All Tripp Lite models include built-in Faraday shielding that provides full line isolation and reduces the cumulative leakage current of connected equipment to less than 100 µA for optimal safety in patient care vicinities.

Full isolation also provides continuous noise filtering and enhanced common mode surge protection.

In addition to full isolation, medical-grade UPS systems
provide battery backup during blackouts, allowing connected equipment to continue operating without interruption.

UPS systems also improve generator backup by supporting equipment during the lag between power outages and generator startup. UPS systems automatically switch between utility power and battery backup in 2 to 5 ms, which is well within the fault tolerances of sensitive computer equipment.

Automatic voltage regulation (AVR) keeps equipment working through voltage sags (brownouts) or high voltages indefinitely, without draining battery power. All models protect connected equipment against damaging surges and disruptive EMI/RFI line noise. SMART2500XLHG also provides pure sine wave
output from battery.

Top 5 FAQs when Choosing Healthcare Power Products

 Tripp Lite Healthcare Solutions

_

MPM Data Sheet

SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 1kVA, 750W, Full Isolation

Line-interactive UPS provides basic battery backup with UL 60601-1 compliance for use in medical facilities, including patient care areas.

Lithium battery backup allows time to save files and safely shut down during blackouts
6 C13 hospital-grade (HG) outlets provide power to medical equipment
Approved for use within the Patient Care Vicinity
Approved to EN60601-1-2:2015, 4th Edition
Alarm and front-panel LEDs report online, battery, fault and overload conditions
10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries

SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation

Line-interactive UPS provides basic battery backup with UL 60601-1 compliance for use in medical facilities, including patient care areas.

Lithium battery backup allows time to save files and safely shut down during blackouts
6 C13 hospital-grade (HG) outlets provide power to medical equipment
Approved for use within the Patient Care Vicinity
Approved to EN60601-1-2:2015, 4th Edition
Alarm and front-panel LEDs report online, battery, fault and overload conditions
10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries

_

 If you would like to contact us about this products, feel free to email us.

_

Medical Newsletter - October 2020

_

__

 
AC and DC Loads and more

  

Lithium 12 Volt 100Amphr Batteries

 

All things Power UPS Medical PDU USB Power

  

Medical Grade Power

 

Xbee Wireless Comparison Sheet

 
IIOT > EPIC Linux Real Time Edge Computer

 

Signal conditioning, data acquisition, and data communication products

  

Loggers

  

  

Programmable Instruments and Power Sources

   

 

IIOT Bluemix IO

 

DAQ USB, Ethernet, WiFi and Buses

  

High Powered AC and DC Power Supplies

  

 
 

  

Industrial IIOT and Automation

 
 

 

 Subscribe

MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

_
Contact a
MasTec Engineer
_
_

 

Custom LabVIEW Development Research & Development Projects

LabVIEW Code Upgrading From LV 6 to Present

Custom LabVIEW Development Modbus ASCII & RTU & TCP

Custom LabVIEW Development RS-232 & RS-485 Instruments

_

CHECK OUT OUR OTHER SITES

 

 

Spot Buying
ODM/OEM Purchases
__ _
___
All Prices are exclusive of NZ GST
Disclaimer
Phone 64 9 273 4200 / Fax 64 9 273 9500

© MasTec Ltd 1997- 2020