Instrumentation Newsletter - September 2020

Industrial Slim Type 5-port
Unmanaged Ethernet Switch

8-Port Slim Industrial Ethernet Switch, w/8*10/100Tx; EOT: -40°C~75°C
with Conformal Coating

Unmanaged 5-port Industrial 10/100/1000
Base-T Ethernet Switch

IIOT Ethernet Switches

The IIoT will be the revolution in the manufacturing industry. It can greatly improve connectivity, efficiency, scalability, time and cost saving for the industrial organizations.

The most important thing, IIoT networks of intelligent devices provides industrial organizations to break open data silos and connect all of their data and processes from factory to offices. Trough IIoT data analyzing also helps business development to clarify how their enterprise is doing, which makes them to do the better decisions.

The IIoT is considered to be an up-going trend in the future.

MasTec carries a broad range of Industrial Grade managed and unmanaged Ethernet Switches and Fiber Switches.

Between the six manufacturing companies listed here, you will find exactly what you require for your industrial site and many IT sites also.

If you need POE we have a growing selection.

If you need Ethernet to Modbus gateways, we can provide quite a range to choose from.

Many of our Wireless Routers and Gateways also container ethernet switches.









Talk to a MasTec Sales

Industrial 8-Port 10/100/1000T Wall-mounted Gigabit PoE+ Switch
Specially built for IoT and IIoT applications, PLANET cutting-edge Industrial 8-Port Wall-mounted Gigabit PoE+ Switch, WGS-818HP, featuring VLAN isolation and 250m PoE extension, supports space-limited installation with its unique compact flat-type casing design

16FE Managed Ethernet Switch

Epsilon-24000 26-Port Gigabit Ethernet Switch

Let the world's smallest Industrial Security Switch protect your IIoT network!

Instrumentation Newsletter - August 2020

Acquisition | Control | Communication | Engineering / Systems

16 Channel, USB Multifunction Analog I/O Device
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two or four 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4" x 4" x 1.25") rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- and more!



A DAQ company with a difference...

MasTec has distributed ACCESIO Inc for several years now.
This is not traditional DAQ or Comms company that is why
we distribute their products. This company covers many areas that most DAQ companies do not go to.

ACCESIO do make Traditional Products, even Legacy
Products but they are right on the edges of all new
technologies in this DAQ (ADC, DAC, DIO, Counters)
and Comms (RS-232, 422, 485, Ethernet, Wireless) arena
and have an extensive product range with many bus types.

+ DAQ and Comms for embedding or uses in rugged
industrial or even military grade systems.

Their product range is very broad, so please ask for help
in selecting the correct unit if you get overwhelmed.

They are highly reliable products, most industrial grade,
many Military grade.

 Do you need industrial or military grade USB hubs, locking power cables, locking USB Cables, operate
over extended temperature, isolation etc?

Do you want the smallest form factor (also lowest weight) comms or digital IO, use mPCI-e?

Do you need local high channel count USB DAQ (ADC, DAC, DIO, Counter) in a closed metal chassis
box for rugged builds?

Do you need Remote high channel count RS-485
DAQ (ADC, DAC, DIO, Counters) in an Industrial grade Chassis?

If you answered 'yes' to any of these questions -
ACCESIO is the company for you!

Below is their extensive product line:
ADC - Analog input
DAC - Analog output
Digital IO
Digital IO - High Current
Serial communication - RS-232, 422, 485
Isolated I/O boards
Signal Conditioning
SSRs and Contact Relays
Wireless DAQ and IO Systems
USB Expansion Ports
USB Isolated Comms
Distributed IO
Enclosures & Termination & Prototyping
Ethernet IO
ETX Embedded Systems
Legacy ISA DAQ and Digitsl IO and Comms
Legacy PC Card and PCMCIA IO
Watchdog Systems

 Plus Technology types, bus types and form factors
ETX Nano 104 Embedded
Distributed and wireless I/O,
Computer-on-module (COM) form factors


Talk to a MasTec Sales

USB Isolated Input and Solid State Relay Output Digital I/O Modules
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 individually optically isolated inputs (channel to channel and channel to ground)
- Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- 16 optically isolated fully protected high-side FETs capable of switching up to 2A
- Internal removable screw terminal board for easy wiring
- All power drawn from USB port, no external power adapter required
- USB/104 form-factor for OEM embedded applications
- Small, (4" x 4" x 1.4") rugged industrial enclosure
- Custom high-speed function driver compatibility
- and more!

PCI Express Multi-Port Multi-Protocol Low Profile Serial Communication Cards
- Eight or four-port PCI Express serial communication cards
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- Low profile PCIe MD2 form factor, works in standard height or low-profile PCIe computers
- High performance 16C950 class UARTs with 128-byte FIFO for each TX and RX
- Supports data communication speeds up to 3Mbps (standard model RS-232 is 460.8kbps)
±15kV ESD protection on all signal pins
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- 3' breakout cable included, terminating with - industry-standard DB9M connectors (no external breakout box required).

USB Isolated Input & Relay Output Digital I/O Module
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 optically isolated inputs
- 16 Form C electromechanical 1A relays
- Internal, removable screw terminal board for easy wiring
- Small (4" x 4"x 1.4") rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping

 mPCIe Solution Article


24-Channel Digital I/O with Change-of-State (COS)
PCI Express Mini Card
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available in M.2 form!



AC and DC Loads and more


Lithium 12 Volt 100Amphr Batteries

Xbee Wireless Comparison Sheet


Embedded Computing

All things Power UPS Medical PDU USB Power


High Powered AC and DC Power Supplies

DAQ USB, Ethernet, WiFi and Buses


Industrial IIOT and Automation


Medical Grade Power



IIOT > EPIC Linux Real Time Edge Computer

Programmable Instruments and Power Sources

IIOT Bluemix IO

Instrumentation Website
Medical Tech Website
Power Product Website

MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

Contact a MasTec Engineer

Custom LabVIEW Development
Research & Development Projects

LabVIEW Code Upgrading
From LV 6 to Present

Custom LabVIEW Development
Modbus ASCII & RTU & TCP

Custom LabVIEW Development
RS-232 & RS-485 Instruments

Spot Buying
ODM/OEM Purchases

All Prices are exclusive of NZ GST
Phone 64 9 273 4200 / Fax 64 9 273 9500

© MasTec Ltd 1997- 2020