_
 
Instrumentation Newsletter - August 2020
_

_
Acquisition | Control | Communication | Engineering / Systems
_

16 Channel, USB Multifunction Analog I/O Device
Features
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two or four 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4" x 4" x 1.25") rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- and more!

-

ACCESIO Inc

A DAQ company with a difference...

MasTec has distributed ACCESIO Inc for several years now.
This is not traditional DAQ or Comms company that is why
we distribute their products. This company covers many areas that most DAQ companies do not go to.

ACCESIO do make Traditional Products, even Legacy
Products but they are right on the edges of all new
technologies in this DAQ (ADC, DAC, DIO, Counters)
and Comms (RS-232, 422, 485, Ethernet, Wireless) arena
and have an extensive product range with many bus types.

+ DAQ and Comms for embedding or uses in rugged
industrial or even military grade systems.

Their product range is very broad, so please ask for help
in selecting the correct unit if you get overwhelmed.

They are highly reliable products, most industrial grade,
many Military grade.

 Do you need industrial or military grade USB hubs, locking power cables, locking USB Cables, operate
over extended temperature, isolation etc?

Do you want the smallest form factor (also lowest weight) comms or digital IO, use mPCI-e?

Do you need local high channel count USB DAQ (ADC, DAC, DIO, Counter) in a closed metal chassis
box for rugged builds?

Do you need Remote high channel count RS-485
DAQ (ADC, DAC, DIO, Counters) in an Industrial grade Chassis?

If you answered 'yes' to any of these questions -
ACCESIO is the company for you!

_
Below is their extensive product line:
ADC - Analog input
DAC - Analog output
Digital IO
Digital IO - High Current
Serial communication - RS-232, 422, 485
Isolated I/O boards
Signal Conditioning
SSRs and Contact Relays
Wireless DAQ and IO Systems
USB Expansion Ports
USB Isolated Comms
Distributed IO
Enclosures & Termination & Prototyping
Ethernet IO
ETX Embedded Systems
Legacy ISA DAQ and Digitsl IO and Comms
Legacy PC Card and PCMCIA IO
Watchdog Systems

 Plus Technology types, bus types and form factors
mPCI-e
PC/104
PCI-e/104
PCI
PCI-e
Pico-ITXe
Pico-I/O
ETX Nano 104 Embedded
EBX
USB
USB/104
USB/PICO
Ethernet
ISA
Distributed and wireless I/O,
Computer-on-module (COM) form factors

 

_
Talk to a MasTec Sales
Engineer
_

 
USB Isolated Input and Solid State Relay Output Digital I/O Modules
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 individually optically isolated inputs (channel to channel and channel to ground)
- Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- 16 optically isolated fully protected high-side FETs capable of switching up to 2A
- Internal removable screw terminal board for easy wiring
- All power drawn from USB port, no external power adapter required
- USB/104 form-factor for OEM embedded applications
- Small, (4" x 4" x 1.4") rugged industrial enclosure
- Custom high-speed function driver compatibility
- and more!

 
PCI Express Multi-Port Multi-Protocol Low Profile Serial Communication Cards
Features
- Eight or four-port PCI Express serial communication cards
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- Low profile PCIe MD2 form factor, works in standard height or low-profile PCIe computers
- High performance 16C950 class UARTs with 128-byte FIFO for each TX and RX
- Supports data communication speeds up to 3Mbps (standard model RS-232 is 460.8kbps)
±15kV ESD protection on all signal pins
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- 3' breakout cable included, terminating with - industry-standard DB9M connectors (no external breakout box required).


USB Isolated Input & Relay Output Digital I/O Module
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 optically isolated inputs
- 16 Form C electromechanical 1A relays
- Internal, removable screw terminal board for easy wiring
- Small (4" x 4"x 1.4") rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping

 mPCIe Solution Article

_

  
24-Channel Digital I/O with Change-of-State (COS)
PCI Express Mini Card
 Features
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available in M.2 form!

_
 
Instrumentation Newsletter - July 2020
_

LoRa Module
 

 LoRa Gateway

LoRaWAN Gateway
 

 LoRa Terminal

Four Faith focus on LoRa & NB-IOT

 

LoRa
FourFaith LoRa products that series lorawan module, lorawan gateway routers and modems with lora terminal network in M2M IoT.

- LoRa Module
- LoRaWAN Gateway
- LoRa Gateway
- LoRa Terminal
- Smoke Detector

NB-IoT
NB-IoT terminal advance in low power consumption, wide coverage, low cost and large capacity, widely used in a variety of vertical industries.
- NB-IoT

 

 Smart City with LoRa Case Study

 ZigBee successfully applied in regional
electricity meter reading system

Talk to a MasTec Sales Engineer

 NB-IOT(DTU) F2910

NB-IoT ultra low power consumption design
NB-IoT Low communication cost
NB-IoT wide indoor coverage area capability
Support Low latency sensitivity and cost-effective for products design

Low Power Consumption
NB-IoT technology focus on the small data and small transmit speed application.So NB-IoT device power consumption can be very small, the device life can be significantly increased from few months to several years.

Cost-effective
NB-IoT need not to re-build the network, radio and antenna are basically multiplexed.For example, like one of China network operators-China Mobile, there is a wider band in 900MHZ owned by China Mobile.Only need to allocate part of the 2G band, you can directly deploy LTE and NB-IoT at the same time. Low speed, low power consumption and narrow bandwidth also bring the advantage of low cost to NB-IoT chip and module.

Wide Coverage Area
NB-IoT has the better indoor coverage capability than LTE.NB-IoT has enhancements of 20dB gain more than LTE, it is equivalent to an increase of 100 times coverage area capacity more than LTE.

Numerous and Powerful Nodes Connection
In the case of the same base station, NB-IoT can provide 50-100 times access nodes more than existing wireless technologies.One sector can support 100,000 connections with low latency sensitivity, ultra-low device cost, low device power consumption and optimized network architecture.

 

 

__

 

AC and DC Loads and more

 

Lithium 12 Volt 100Amphr Batteries


Xbee Wireless Comparison Sheet
 

  

Embedded Computing
 


All things Power UPS Medical PDU USB Power

 

High Powered AC and DC Power Supplies


DAQ USB, Ethernet, WiFi and Buses

 

Industrial IIOT and Automation

 
 

Medical Grade Power

 

Loggers

IIOT > EPIC Linux Real Time Edge Computer
 

Programmable Instruments and Power Sources



IIOT Bluemix IO

 
Instrumentation Website
 
Medical Tech Website
 
Power Product Website

 Subscribe
MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

Contact a MasTec Engineer

Custom LabVIEW Development
Research & Development Projects

LabVIEW Code Upgrading
From LV 6 to Present

Custom LabVIEW Development
Modbus ASCII & RTU & TCP

Custom LabVIEW Development
RS-232 & RS-485 Instruments

Spot Buying
ODM/OEM Purchases

All Prices are exclusive of NZ GST
Disclaimer
Phone 64 9 273 4200 / Fax 64 9 273 9500


© MasTec Ltd 1997- 2020