Micronor has done it again with an expanded range of "Light Only" Fiber Optic Products

 Line Card pdf

Manufacturer List

Short Profile pptx

© MasTec Ltd


Welcome to MasTec's Newsletter
Nov - Dec 2016
Since 1989
Last Newsletter for 2016

A new range of Fiber Optic Light only devices for special situations. Transducer, Switches and Encoders.
It may fit your requirements.. Fast Installs
view

Expanding on last months 900 MHz announcement

XBee SX is the "muscle module"

MasTec is your only Full Product Line
Digi Distributor in NZ
since 1991

Digi 900MHZ XBEE WIreless DigiMesh or Point to Multipoint 900MHz long distance mesh or multipoint networking are now certified for NZ.

It has taken two years of extensive work, development and negotiations with the NZ Radio Frequency Group in the government agency to arrive at this announcement.

This is a very important technology availability for NZs development of remote wireless systems, especially for long haul rural or non cellular areas. Pull data out of these difficult areas to link up to Digi 3G or LTE Cellular Routers or Gateways.

Digi's Announcement
We are pleased to announce the XBee SX 900 MHz RF modules have been certified for use in New Zealand!

OverView

The XBee SX is the "muscle module" of the XBee ecosystem, providing a combination of reliability and redundancy for OEMs building low-power, mission-critical wireless devices.

They utilize the DigiMesh® networking protocol, featuring redundant mesh network operation and support for low-power sleeping nodes.

Don't require mesh network architecture can configure to operate in simple point to multipoint mode.

With exceptional range and strong interference blocking, these modules are ideal for applications requiring the combination of range, data redundancy and data reliability.

BENEFITS

- DigiMesh or Point to Multipoint networking topology for redundancy and reliability

- 256-bit AES encryption for secure data communications

- Adjustable output power up to 20 mW for New Zealand variant

- XBee SMT form factor saves valuable PCB space

- Fully certified for use in unlicensed 900 MHz band

Geography: New variant available to order for customers in New Zealand.

Three Free LabVIEW Books
"Three Methods to program effectively in LabVIEW"

Book 1 "Hidden Data", that is, cleaning up LV Program's by Removing Constants from Diagrams and putting them in Configuration Files for Loading at runtime.

This method does not use ini or XML files but a far more robust LabVIEW centric method, also self documents


Book 2 "Abstraction", that is, removing complexity in the top layer of a LabVIEW diagram by building Abstracted Message Driven LV Components.

This shows how to build Message driven (Test Verbs) Abstracted named (noun) Components that are safe & robust.

It also leads to better cohension of course and no/low coupling.

Book 3 "Real Time Cluster Constants Editor", that is, removed Diagram Constants that are loaded at Run Time, can now be edited, in situ, inside the program while it runs, allowing tuning of programs in Real Time. Changes to the Constants can also be saved back into their files.

If you read the LV blogs you will see many are stuck on what do to with Constants in Diagrams. This new method solves so many issues in LabVIEW development and produces a real time editing solution for tuning programs.

All books are expansive, yet simple and this information is not often seen in other LabVIEW information. Using these methods will simplify design and development plus stabilise your programs and it even make installs easier.

Updating and expanding programs then follows a standard pattern already in the program design.

These methods delineates Public and Private data. Private Data is unseen outside its own component.

 

To get your copies, send this email request to the MasTec LabVIEW Develop Laboratory in Northland NZ.

Our instructor will also come to your site and do training with your LabVIEW team using these new methods.

Keep up with MasTec's latest LabVIEW Notes

Rural Tech
March Newsletter     April Newsletter

Custom LabVIEW Development
Research & Development Projects
Link

Contact a
MasTec Engineer

LabVIEW Code Upgrading
From LV 6 to Present
Link

Contact a
MasTec Engineer

Custom LabVIEW Development
Modbus ASCII & RTU
Link

Contact a
MasTec Engineer

Custom LabVIEW Development
RS-232 & RS-485 Instruments
Link

Contact a
MasTec Engineer


Fiber Optic Emergency Stop read


Fiber Optic Linear Sensor read


Low Cost DAQAmi Temperature System Soft/Hard Read


PACProjectPro PACProjectBas SoftPAC pdf



Gigabit POE Ethernet Switch read


Hand Pump for test and calibration


MaTec has been using Meriam Linear Laminar Flow Elements ( gold gadget above ) for many years. Connect a differential bi-directional manometer across the LFE to measure the differential pressure.
 

Awesome Loggers


A Full Family of Embedded Intel Gen 6 Boards read

pptx1 Bluetooth Wifi Chips & Boards pptx2
 
Instrumentation Web Site

Siglent - Dwyer - GW Instek
Fluke - Extech - Testo - Rigol

May Newsletter     April Newsletter


Reseller Newsletter
March Newsletter     April Newsletter

 Subscribe
MasTec's Newsletters has 12K readers

12,000+ clients read our eNewsletters each month

 Technology Chat
Do you need some consulting time

A short chat may save a lot of time and money

Custom LabVIEW Development
Machine Monitoring and Control
Link

Contact a
MasTec Engineer

MasTec is now For Sale
Present MD is to retire in early 2017

Contact
Trustees



IFiber Optic U Sensor read


Fiber Optic Micro Switch read


Open-source Linux drivers most USB & PCI Read


Opto 22 IOT



Yes yes >> Beer Monitoring
Measurement of O2, CO2, extract, alcohol.




Pressure Transmitters


or use a liquid Manometer


New Product releases


Intel® 6th Gen™ , NAS POS, ATM & Signage read

Awesome Windows Embedded Compact PACs
read

 
Power Product Web Site

TrippLite - Soltec
PowerVAR - PowerCom

March Newsletter     April Newsletter

 
March Newsletter   April Newsletter  June Newsletter

Custom DAQ - DIO - Timer
Hardware Development
Link

Contact a
MasTec Engineer

Custom PAC - PLC
Hardware Development
Link

Contact a
MasTec Engineer

LabVIEW Courses
Learn LabVIEW - Experienced Developer

Contact a
MasTec Engineer

LabVIEW Coaching on
MasTec's New Programming Techniques

Contact a
MasTec Engineer
 
           

MasTec Projects


LabVIEW Books

LabVIEW Training

 MasTec Projects

Three LabVIEW Books
"Three Methods to program more effectively in LabVIEW"

Book 1 "Hidden Data", that is, cleaning up LV Program's by Removing Constants from Diagrams and putting them in Configuration Files for Loading at runtime.

This method does not use ini files but a far more robust LabVIEW centric method not seen in other literature. It also cleans up Diagrams and Self Documents.

Book 2 "Abstraction", that is, removing complexity in the top layer of a LabVIEW diagram by building Abstracted Message Driven LV Components.

This shows how to build Message driven (Test Verbs) Abstracted named (noun) Components that are safe & robust. It also leads to better cohension of course and no/low coupling.

All books are expansive, yet simple and this information is not often seen in other LabVIEW information. Using these methods will simplify design and development plus stabilise your programs and it even make installs easier. Updating and expanding then follows a standard pattern already in the program design.

Also these methods delineates Public and Private data clearly.

Once you have built a program using this LCOP method, if at any point you want to add or delete constants to any of your components cluster constants, maybe just add one more constant or truly expand the calibration to include a whole new sensor set or add more paths etc, just expand the type def for the constant data clusters and make the new entries. These entries can be any data type or grahical data type. Once this new type def cluster is saved, it will automatically appear in the Constant Data Editor TAB Selector . Enter your new data into the new constants and the editor will save this new set of constants for that cluster that has been expanded.

So only one diagram programming step adjusting the Type Def Cluster constant is required for this step. Next time you re/start the program, the expanded cluster with the new data will automatically appear in the section of your program. The wire from the file read and unflatten from string section will now contain the new constants.

You do not have to add or change anything in the diagram to make this happen. The program automatically knows the shape and structure of the new cluster loaded via the cluster local variable that will have expanded to include the new constants and this gives the shape to the file read and unflatten from string module.

Third Book

Book 3 "Real Time Cluster Constants Editor", that is, removed Diagram Constants that are loaded at Run Time from a config file, can now be edited, in situ, inside the Program /or its Component while it runs, allowing tuning of programs in Real Time. Changes to the Constants can also be saved back into their original configuration files at run time. This addition of the Real Time Editor removes the need to exit a compoent or program to edit constants.

To get your copy, send this email request to the MasTec LabVIEW Develop Laboratory in Northland NZ.

MasTec Training
"LabVIEW for Everyone"

MasTec recently under took a 4 day Training course for 15 Academics, (Professors and Grad Students), at one of Oceania's largest universities.

The focus was on getting students to the point where they can undetake projects by the end of the course. A big ask. However, the focus was not on how to use all the bits inside LabVIEW to make software but the development of strategies to allow projects to be undertaken.

The MasTec Instructor has trained all over the globe and has taught over 2000 students.

He will also come to your site and do training with your LabVIEW team, using traditional or these new LabVIEW methods MasTec has developed.

Keep up with MasTec's latest LabVIEW Notes


MasTec Projects

MasTec has several large projects on its books, spread out over about 3 years. There are gaps in this schedule.

MasTec is undertaking projects in legacy LV 6.1 systems still running in Windows XP.

Major projects are still undetaken in LabVIEW 7.1 running in Windows 7 32 Bit OS, very successfully. LabVIEW 7.1 is still the best LabVIEW ever released. Fast, efficient and stable. Win 7 32 bit OS will be available for some time. Most large corporations are still running Win 7 due to its excellent history

Other projects are using from LabVIEW 2010 up to the present version of 2015 SP1, which is good, but very processor hungry and slower. We only recommend I7s CPUs with this software with SSDs for the OS and LabVIEW.

Over the last year MasTec has completed 6 major projects in sites through out NZ. Several hundred hours of programming work has been completed, as well as many hundreds of commissioning, site management, and hardware installation.

All these projects involved LabVIEW at the core. However, many of these projects also include PACs, PLCs, Process Controllers, with peripherals like Servos, Actuators, VSDs, Water measurement and control, Hydraulic Control and other real world systems.

Announcement >>> Opportunity

The MD of MasTec has recently decided it is time to realign his life after 50 years of technology, to go horse riding with his wife and dogs Polly, Lilly and newly arrived Freddie.

If you have an interest in owning this important technology company, now is the time to act and start communcation for succession in early 2017.

Contact the Trustees



M2M, IOT,Industrial Wireless and Embedding

XBEE Format Devices



 

What is XBEE??? read



Digi 900 MHZ Aus and NZ models read

 
MasTec is interested to hear from engineers who have an interest in 900MHZ wireless systems.

You may have noticed that the NZ RF govt.nz group have opened the 900MHZ band to now cover from 915 to 928MHz ( with some restrictions)
We have 900MHZ wireless ready to go

Contact a MasTec Engineer

 

Why is XBEE important??? read



XBEE Land Page - XBEE Cellular read


Digi International has several 900MHZ wireless technologies ready to go for the NZ market.

XBEE, Modem, M2M, Mesh and Long Distance
We are looking for clients who require OEM quantities of these products to make the RF Certification process feasible

Contact a MasTec Engineer


Tripplite USB Charging Systems


Corporate USB Charging Centers

Personal USB Charging Centers


The TrippLite Corporate USB Chargers

TrippLite makes a broad range of USB Charging Products

Their largest system is a 48 Device Charger designed for corporate use with Android, IOS and Win Technology Smart Phones and Tablets

These USB Charging Cabinets have air flow control to protect devices under charge.



 

Rack mounted USB Chargers for inside IT Cabinets.

Advantages are airconditioned environments are perfect for charging large numbers of devices

The TrippLite Personal USB Chargers

If you are mobile and on site there is nothing worse than running out of battery on the Smart Phone or Tablet.

Tripplite has this covered with their combo pack with two cables and an extended runtime battery pack in one unit.

Charge and Run two devices at a time.

Car and Van chargers with two outlets a "His and Hers".

And for the desktop at home in the home office a multiport charger.

Tripplite PDU Systems


Cabinet PDUs

 

Rack PDU Sytems


The TrippLite PDUs

Single Phase Simpler PDUs

Rack mount

for excellent monitoing and control

Single Phase more advanced PDUs

Rack mount with all the bells and whistles

for excellent monitoing and control

Racking Cabinet PDUs

Single Phase and Three Phase Hot Swap PDUs

Full Monitoring and Control

The TrippLite PDUs

 

 

 

 


TrippLite Inverter Chargers


Inverter Chargers

Commercial and Medical Invertrers

 

The TrippLite Sinewave Inverter Chargers

TrippLite has been making Inverter Chargers and Inverters since the early 1990s, both 110 VAC and 230 VAC units

Models 230 VAC 50 Hz

  • APSX1012SW > 12VDC 1000 watt
  • APSX2012SW > 12VDC 2000 watt
  • APSX3024SW > 24VDC 3000 watt
  • APSX4048SW > 48VDC 4000 watt
  • APSX6048VRNET > 48VDC 6000 watt

Most Units are hardwired into systems, both AC inputs and Outputs. For DC Cables we recommend Welding Cable,

The TrippLite Quasi Sine Inverter Chargers

The TrippLite Quasi Sinewave Units have a 100% overload for starting heavy loads.

Models 230 VAC 50 Hz

  • APSX750 > 12VDC 750 watt
  • APSX1250 > 12VDC 1250 watt
  • APSINT2012 > 12VDC 2000 watt
  • APSINT2424 > 24VDC 2400 watt
  • APSINT3636VR > 36VDC 3600 watt
  • HCRK Medical Inverter plus battery > 12 VDC 300 Watt



TrippLite UPSs


Single and Three Phase UPSs

Medical Grade UPSs


The TrippLite UPSs

TrippLite made the first UPS for PCs in the 1980's. MasTec started selling TrippLite in 1993 and has thousands of units running in Oceania.

MasTec stocks a range of UPSs in NZ from <1000VA to 10KVA

TrippLite has 52 UPS Models for 230 VAC 50 HZ

  • Audio/Video
  • Data Center
  • Eco Energy-Saving
  • Desktop
  • Hospital/Medical
  • Network/Server
  • Hot-Swap

TrippLite is the leader in mid size Three Phase UPSs also.

TrippLite UPS Software is enterprise wide

The TrippLite Medical Grade UPSs

The TrippLite Medical Grade UPS is now the defacto UPS used in hospitals and medical sites in NZ and Australia.

They are also used extensively for free range medical equipment when patients move around in care services.

Models for 230/240 VAC systems.

Models for Medical Use include

Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet

Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise.

Health Care Brochure pdf Download

Health Care Medical pdf Download



Racking and Enclosures



The TrippLite Racking and Enclosures (over 100 models)

Enclosures from 2U to 28U heights

With locking doors and side panels, enclosed server rack cabinets are ideal for applications requiring physical equipment security at the rack level (as opposed to the room level). Ventilated doors encourage ample airflow from front to back. Server rack cabinets are popular choices for high-density data centers and server rooms.

Open Frame Racks

Open-frame server racks consist of mounting rails without sides or doors. They’re typically used for applications that don’t require physical security and don’t need added airflow control.

An open-frame rack provides easy access and offers plenty of open space for cable management, making this solution ideal for network wiring closets and distribution frame applications with high-density cabling
Open racks have two or four mounting rails (called posts); 2-post racks generally require less depth but support less weight than 4-post racks

The TrippLite Racking and Enclosures (over 100 models)

Server Racks

wall-mount-network-switch-rack-enclosure

Choose an enclosed server rack for heavier equipment, hotter equipment and applications with higher wattages per rack
Special options include front doors with shatter-resistant clear acrylic windows, seismic ratings for earthquake zones and construction to NEMA IP54 standards for harsh environments


Data center racks organize IT equipment into standard-sized server cabinets for greater efficiency throughout the data center. Rack styles range from open-frame racks consisting of two or four mounting rails (called posts) without sides or doors to lockable enclosure cabinets with rails, front and rear doors and side panels.

The height of a rack cabinet is measured in units designated by the letter U (each rack unit is 1.75 inches/44.45 mm) high; racks are available with capacities ranging from 2U to 58U
Choose floor-standing racks with rolling casters or wall-mount racks for applications where floor space is limited or extra security is important



Power Conditioners and Surge Suppressors
2000 Watt Line Conditioner


10 Amp Euro 4 Surge Suppressor

The TrippLite AC Power Line Conditioners 1000 Watts

The LR1000 1000W 230V Power Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power. Built-in automatic voltage regulation(AVR) offers three levels of voltage stabilization that correct undervoltages as low as 168V and overvoltages as high as 278V back to regulated 230V nominal power. Providing optimum voltage conditions not only extends the life of your equipment, but also keeps your equipment working through brownouts and prolonged overvoltage conditions.

A 340-joule surge suppression rating meets the IEEE-587 standard for surge suppression(both categories A and B) and prevents spikes from inflicting damage, data loss or corruption and audio/video performance problems on your connected equipment. EMI/RFI noise filtering protects your AC line from disruptive electromagnetic and radio interference.

Just connect the detachable 2-meter NEMA 5-15P to C13 power cord to an AC power source, and plug up to four devices into the outlets. Two NEMA 5-15R and two C13 outlets accommodate a variety of connected components. An included UNIPLUGINT universal adapter allows most worldwide plug configurations to connect to the LR1000’s C13 outlets. You can monitor incoming voltage levels using the three diagnostic LEDs on the front panel. The compact LR1000 fits comfortably into your computer or home theater setup.

The TrippLite AC Power Line Conditioners 2000 Watts

MasTec ships hundreds of these units each year for use in Commercial and Industrial Systems.

A higher power model than than the LR1000, the LR2000 2000W 230V Power Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power. Built-in automatic voltage regulation(AVR) offers three levels of voltage stabilization that correct undervoltages as low as 168V and overvoltages as high as 278V back to regulated 240V, 220V or 208V nominal power.

Euro 4 Surge bar is Metal Case with ground lugs for series noise control on AC Lines. Largest selling Industrial bar in the world.



Serial Server s

Most Advanced Serial Server


Most Advanced Wirless Serial Server

The TrippLite Advanced Serial Server System

Tripp Lite’s B094-008-2E-V is the most advanced console / terminal server platform available today.

In a secure, desktop/rackmountable appliance, it offers an in-band and cellular management solution for serial console ports, servers, virtual servers, service processors, UPS & PDU's, environmental monitoring and more.

Certified for use with the largest Teleco Verizon's network, it features a built-in cellular modem that supports 4G LTE network speeds.

This 8 port serial console / terminal server enables system administrators to securely access and control their data centers and networks from anywhere in the world.

And this enterprise level unit is equipped with a built in cellular modem, dual Ethernet NIC, 4GB internal USB flash, and runs on Linux for scalability and reduced downtime.

The B094-008-2E-V offers advanced software features that surpass the requirements of even the most demanding applications.

These features include Network UPS Tools for UPS monitoring, PowerMan for integrated PDU and RPC functions with in session hotkey support, Pattern match alerting,

Open access to the Linux shell for scripting, heartbeat monitoring with automatic fail-over,

Cisco pinouts and much more.

Assembled in the USA.

The TrippLite Advanced Serial Server System

Built in cellular modem for wireless access
Certified for use with Verizon's network
Supports 4G LTE network speeds
4GB local FTP/TFTP storage for device configuration files
IPsec VPN support
Configured to use standard Cat5e/6 patch cable when connecting to Cisco devices
Tripp Lite's console servers all use an embedded FIPS 140-2 OpenSSL cryptographic module that has been validated to meet the FIPS 140-2 standards and has received Certificate #1051.
When using SSH, HTTPS or SDT Connector to connect to any service on the console server while running in FIPS mode, they will be utilizing the embedded FIPS compliant module. In order to connect using any of the protocols, you must use a cryptographic algorithm that is FIPS approved or it will fail.
Features 4GB internal USB flash
Secure Shell (SSH V2 and V3)
TACACS+ , RADIUS, LDAP and Kerberos authentication
Local authentication
System event syslog
SSH port and IP forwarding support
IP packet filtering
Break over SSH support
Port triggers with SNMP and email alerts
Offline data logging (Syslog, NFS, CIFS)
Online data buffering and logging
Multiple users per port (with port sniffing)
Telnet/SSH/Raw TCP connect
RFC 2217 - Port Redirection
Integrated AJAX serial console and system terminal via web interface
Native IPMI 1.5 and 2.0 (RMCP/RMCP+) support for BMC and service processor access and control
Service processor access (IPMI, ILO, LOM and more)
Access to KVM built in to service processors (DRAC, RSA)
Limit user access by LAN device and SDT service for that device
Port triggers with SMNP and email alerts for all tunnel traffic
Each gateway can port forward to an unlimited number of locally networked hosts (computers, routers)
Embedded DHCP server for management LAN devices
Network UPS Tools for UPS Monitoring and Management
PowerMan for PDU and RPC Management
Command Line interface (Linux Shell)
NAGIOS distributed monitoring
Linux with source code access
Constructed of heavy-duty steel housing
Desktop or rackmountable with included mounting brackets



Keyspan Products

Keyspan by Tripp Lite
Easy Presenter Wireless Remote Control,
White, 60-ft. Range


Keyspan by Tripp Lite
Presentation Pro Wireless Remote Control,
Black, 100-ft. Range

The TrippLite Presentation Products

Ideal for large meeting rooms or auditoriums to give lecturers, trainers or presenters wireless control of PowerPoint, Keynote and other presentation programs that use PowerPoint keystrokes up to 100 ft. away.

Designed for PowerPoint, Keynote and other programs that use PowerPoint keystrokes

Ideal tool for presenters and lecturers

100 ft. RF range covers large meeting rooms and lecture halls
Plug and Play, no software to install

Volume, 2-button mouse and laser pointer controls



More Models

The TrippLite Presentation Products

RF Connectivity: Works to 60 ft or more -- even through walls and furniture
Laser Pointer: Highlight details of your presentation with ease
Audio Control: Volume and mute buttons control sound
Plug & Play: No software to install, just plug it in and it works within seconds
Travel Pouch: Convenient for carrying the remote and receiver
Buttons on the Remote:
Launch presentation (F5)
Slide forward
Slide back
Black screen
Quit presentation (ESC)
Volume up
Volume down
Mute
Laser pointer
Button names - associated keystrokes - actions:
Previous Slide (Left Triangle Button) - Page Up - Moves to previous slide in slideshow
Next Slide (Right Triangle Button) - Page - Moves to next slide in slideshow
Volume Up (Up Triangle Button) - System Volume Up Key - Raises the volume level on your computer
Volume Down (Down Triangle Button) - System Volume Down Key - Lowers the volume level on your computer
Mute (Speaker Button) - System Mute Key - Mutes all sounds on your computer
Black Screen (Black Square Button) - B - Blacks screen during a slideshow. Press again to un-black screen
F5 - F5 -Starts slideshow mode. NOTE for Mac Users: Install optional software to enable F5 to start slideshow mode in PowerPoint/Keynote (See "Help & Downloads" tab)
ESC - ESC - Stop slideshow
Laser Button (Red Circle Button) - None or n/a - Press to turn on laser pointer



Surface Pro Kits

Surface Pro Accessories 4K HDMI

The TrippLite Laptop and Surface Pro Accessories

The P137-GHDV-V2-K 4K Video and Ethernet 2-in-1 Accessory Kit expands the capabilities of your Microsoft® Surface® or Surface Pro by adding Gigabit Ethernet access and an external DVI, VGA or 4K HDMI monitor. These two lightweight, low-profile adapters fit neatly into your backpack or laptop bag, so you can use this Microsoft Surface accessory kit anywhere you go.

For displaying videos, spreadsheets, documents and presentations on a larger screen, the Mini DisplayPort™ to DVI/VGA/HDMI adapter has separate DVI-D, HD15 and HDMI female ports for connecting your Surface’s Mini DisplayPort to a DVI, VGA or HDMI monitor, television or projector. It supports video resolutions up to 1920 x 1080 (DVI-D); 1920 x 1200, including 1080p (HD15); and 4K x 2K Ultra High Definition up to 3840 x 2160 (HDMI) at 24/30 Hz. It also supports 36-bit Deep Color (12 bits per channel). Only one display can be connected at a time.

The USB 3.0 SuperSpeed to Gigabit Ethernet adapter allows your Surface to access a 10/100/1000 Mbps wired network without an internal Ethernet card. It achieves USB 3.0 data transfer speeds up to 5 Gbps without compromising signal quality. It complies with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards and supports IEEE 802.3az Energy Efficient Ethernet, as well as full- and half-duplex operations, suspend mode and remote wakeup via link-up, and magic packet.

The TrippLite Laptop and Surface Pro Accessories

Features

Mini DisplayPort to DVI/VGA/HDMI Adapter
?Connects your Surface to a DVI, VGA or HDMI display
?DVI-D port supports video resolutions up to 1920 x 1080 (1080p)
?HD15 port supports video resolutions up to 1920 x 1200, including 1080p
?HDMI port supports UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 Hz
?Supports 36-bit Deep Color (12 bits per channel)

USB 3.0 SuperSpeed to Gigabit Ethernet Adapter
?Connects your Surface to a wired Ethernet network
?Ensures true 10/100/1000 Mbps network speeds
?Reaches USB 3.0 data transfer speeds up to 5 Gbps
?Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3az standards
?Supports full- and half-duplex, suspend mode and remote wakeup via link-up, and magic packet

Plug and Play Operation
No external power supply needed
Small enough to carry easily in laptop bag or backpack
Compatible with Microsoft Surface and Surface Pro

Docking Stations Also.



ODM/OEM Purchases      All Prices are exclusive of NZ GST  Spot Buying

© MasTec Ltd         Phone 64 9 273 4200          Fax 64 9 273 9500       info@mastecnz.co.nz

© MasTec Ltd