We offer a wide variety of Pulse Oximetry Testing, everything from Nelcor testers to digital analyzers, to our own FingerSim simulators. Pulse Oximetry Simulator
- 80%, 90%, 97% - Fingers, Holder and Case
FingerSim Starter Kit Pulse Oximetry Simulators
- 80%, 90%, 97% - Fingers Only
FS-1000-RS Pulse Oximetry Module - add-on for PS/NIBP Series - (FingerSims Required) MSP-2100
The BC Biomedical FingerSim System provides a rapid, inexpensive and convenient means of assessing the function of the entire pulse oximeter system, including the oximeter sensor. A set of three FingerSims are included in each kit. Each of the three FingerSims contain a fluid with precisely controlled light absorption characteristics which are sandwiched between two glass slides. The concentration of the substances in the three mixtures allow the FingerSim to mimic the light absorbing qualities of arterial blood as measured by an oximeter at different oxygen saturation values (nominally 97%, 90% and 80%). The FingerSims are easily identified by the color coded end caps (Red - 97%, Blue - 90% and Black - 80%). Squeezing the colored coded flat end will produce a pulsatile movement of the solution. This pulsation is detected as a pulse by the oximeter system being tested, thus allowing the oximeter to calculate and display an SpO2 value. The value corresponds to the fixed light absorbing characteristics of the particular FingerSim being used.
Start Up Kit-3 FingerSims Includes the Following:
Plastic Carrying Case (for FingerSims, User Manual & FingerSim Holder) User Manual
The BC Biomedical FingerSim can be used with any finger probe SpO2 monitor.
Formerly made by Nonin Medical - known as the Finger Phantom.
The FingerSim Starter set is cost effective and easy to use. Easily add calibrated pulse rates with the optional BC Biomedical SPO-2000 Pulse Oximtery Simulator or add pulse oximetry testing capabilities to the BC Biomedical NIBP, PS-2200 & PS-2100 with the purchase of the BC Biomedical MSP-2100 Pulse Oximetry Module.
PLEASE NOTE: FingerSims are guaranteed for a shelf life of 12 months, these units are NOT able to be recalibrated. Please order a FingerSim Replacement Set at the end of the one year replacement cycle.
Replacement Set of 3 FingerSims:
Used alone, the user simply pushes on the FingerSim to generate a "pulse". Or, use with the SPO-2000 to add a calibrated pulse rate!
Formerly made by Nonin Medical - Finger Phantom.
The FingerSim Replacement Set comes with the FingerSims only.
Easily add Calibrated pulse rates with the optional BC Biomedical SPO-2000 Pulse Oximtery Simulator or add Pulse Oximetry testing capabilities to the BC Biomedical NIBP, PS-2200 & PS-2100 with the purchase of the BC Biomedical MSP-2100 Pulse Oximetry Module.
PLEASE NOTE: FingerSims are guaranteed for a shelf life of 12 months, these units are NOT able to be recalibrated. Simply order a FingerSim Replacement Set at the end of the one year replacement cycle.
The MSP-2100 can be plugged into the auxiliary port of BC Biomedicals PS-2100, PS-2200 and the NIBP Series to provide a calibrated pulse rate (FingerSim Required, but NOT included).
The MSP-2100 is not a stand alone product and must be used with the PS-2100, PS-2200 or the NIBP Series and a FingerSim.
Accepts BC Biomedical FingerSim to provide SpO2 output at 80, 90 & 97%
Pulse synchronized w/PS2100, PS2200 & NIBP1000 products via auxiliary port
Powered from auxiliary port
SPO2 Tester - Nellcor Pocket Tester Max SRC-MAX Pulse Oximetry Module -
Stand alone - (FingerSims Required)
SPO-2000 Carrying Case - (Hard) - BCB SPO-2000, FingerSims & Accessories BC20-40110 The SRC-MAX is intended for qualified technicians to functionally test Nellcor OXIMAX technology-based pulse oximeters and OEM OXIMAX technology-based monitors.
The BC Biomedical SPO-2000 Pulse Oximetry Simulator works in conjunction with FingerSims to deliver an SPO2 output with a calibrated pulse rate! Included with the purchase is a BC20-21112 Power Supply with Interchangeable US, UK, AUS and Euro adapters.
The SPO-2000 gives a calibrated pulse rate for 30, 60, 90, 120, 150 and 180 BPM pulse rates.
Each pulse rate has a unique LED indicator. The SPO-2000 is designed to work in conjunction with the FingerSim manufactured by BC Biomedical and available from BC Group International. The FingerSim is used to verify the operation of pulse oximeters. The SPO-2000 adds calibrated pulse rates to the functionality of the FingerSims. (FingerSim Required, but NOT included).
NOTE: The accuracy of the saturation percentage on the pulse oximeter being tested is a function of the FingerSim - not the SPO-2000. The SPO-2000 only controls the pulse rate. See the user information included with the FingerSim for accuracy and related data.
The BC20-40110 a plastic carrying case with a custom foam insert to hold an SPO-2000, FingerSims and accessories.
SPO2, FingerSims and accessories sold separately.
Battery Eliminator - Universal (NIBP-1010 (Only)/SPO Series and AA-8000) BC20-21112
Battery Eliminator 12VDC Interchangeable US, UK, AUS and Euro Adapters
(NIBP-1010 (Only)/SPO Series and AA-8000)
Talk to a MasTec Sales Engineer
© MasTec Ltd 1997- 2019