Micronor has done it again with an expanded range of "Light Only" Fiber Optic Products
Line Card pdf Short Profile pptx © MasTec Ltd
Welcome to MasTec's Main Page
Nov - Dec 2016
Since 1989
Last Newsletter for 2016
A new range of Fiber Optic Light only devices for special situations. Transducer, Switches and Encoders.
It may fit your requirements.. Fast Installs viewExpanding on last months 900 MHz announcement XBee SX is the "muscle module" MasTec is your only Full Product Line
Digi Distributor in NZ
since 1991Digi 900MHZ XBEE WIreless DigiMesh or Point to Multipoint 900MHz long distance mesh or multipoint networking are now certified for NZ.
It has taken two years of extensive work, development and negotiations with the NZ Radio Frequency Group in the government agency to arrive at this announcement.
This is a very important technology availability for NZs development of remote wireless systems, especially for long haul rural or non cellular areas. Pull data out of these difficult areas to link up to Digi 3G or LTE Cellular Routers or Gateways.
Digi's Announcement
We are pleased to announce the XBee SX 900 MHz RF modules have been certified for use in New Zealand!OverView
The XBee SX is the "muscle module" of the XBee ecosystem, providing a combination of reliability and redundancy for OEMs building low-power, mission-critical wireless devices.
They utilize the DigiMesh® networking protocol, featuring redundant mesh network operation and support for low-power sleeping nodes.
Don't require mesh network architecture can configure to operate in simple point to multipoint mode.
With exceptional range and strong interference blocking, these modules are ideal for applications requiring the combination of range, data redundancy and data reliability.
BENEFITS
- DigiMesh or Point to Multipoint networking topology for redundancy and reliability
- 256-bit AES encryption for secure data communications- Adjustable output power up to 20 mW for New Zealand variant
- XBee SMT form factor saves valuable PCB space
- Fully certified for use in unlicensed 900 MHz bandGeography: New variant available to order for customers in New Zealand.
Three Free LabVIEW Books
"Three Methods to program effectively in LabVIEW"Book 1 "Hidden Data", that is, cleaning up LV Program's by Removing Constants from Diagrams and putting them in Configuration Files for Loading at runtime.
This method does not use ini or XML files but a far more robust LabVIEW centric method, also self documents
Book 2 "Abstraction", that is, removing complexity in the top layer of a LabVIEW diagram by building Abstracted Message Driven LV Components.
This shows how to build Message driven (Test Verbs) Abstracted named (noun) Components that are safe & robust.It also leads to better cohension of course and no/low coupling.
Book 3 "Real Time Cluster Constants Editor", that is, removed Diagram Constants that are loaded at Run Time, can now be edited, in situ, inside the program while it runs, allowing tuning of programs in Real Time. Changes to the Constants can also be saved back into their files.
If you read the LV blogs you will see many are stuck on what do to with Constants in Diagrams. This new method solves so many issues in LabVIEW development and produces a real time editing solution for tuning programs.
All books are expansive, yet simple and this information is not often seen in other LabVIEW information. Using these methods will simplify design and development plus stabilise your programs and it even make installs easier.
Updating and expanding programs then follows a standard pattern already in the program design.
These methods delineates Public and Private data. Private Data is unseen outside its own component.
To get your copies, send this email request to the MasTec LabVIEW Develop Laboratory in Northland NZ.
Our instructor will also come to your site and do training with your LabVIEW team using these new methods.
Keep up with MasTec's latest LabVIEW Notes
Rural Tech
March Newsletter April Newsletter
Custom LabVIEW Development
Research & Development Projects Link
Contact a MasTec Engineer
LabVIEW Code Upgrading
From LV 6 to Present Link
Contact a MasTec Engineer
Custom LabVIEW Development
Modbus ASCII & RTU Link
Contact a MasTec Engineer
Custom LabVIEW Development
RS-232 & RS-485 Instruments Link
Contact a MasTec Engineer
Fiber Optic Emergency Stop read
Fiber Optic Linear Sensor read
Low Cost DAQAmi Temperature System Soft/Hard Read
PACProjectPro PACProjectBas SoftPAC pdf
Gigabit POE Ethernet Switch read
Hand Pump for test and calibration
MaTec has been using Meriam Linear Laminar Flow Elements ( gold gadget above ) for many years. Connect a differential bi-directional manometer across the LFE to measure the differential pressure.
Awesome Loggers
A Full Family of Embedded Intel Gen 6 Boards read
pptx1 Bluetooth Wifi Chips & Boards pptx2
Instrumentation Web Site
Siglent - Dwyer - GW Instek
Fluke - Extech - Testo - Rigol
May Newsletter April Newsletter
Reseller Newsletter
March Newsletter April Newsletter
Subscribe
MasTec's Newsletters has 12K readers
12,000+ clients read our eNewsletters each month
Technology Chat
Do you need some consulting time
A short chat may save a lot of time and money
Custom LabVIEW Development
Machine Monitoring and Control Link
Contact a MasTec Engineer
MasTec is now For Sale
Present MD is to retire in early 2017
Contact Trustees
IFiber Optic U Sensor read
Fiber Optic Micro Switch read
Open-source Linux drivers most USB & PCI Read
Opto 22 IOT
Yes yes >> Beer Monitoring
Measurement of O2, CO2, extract, alcohol.
Pressure Transmitters
or use a liquid Manometer
New Product releases
Intel® 6th Gen , NAS POS, ATM & Signage read
Awesome Windows Embedded Compact PACs read
Power Product Web Site
TrippLite - Soltec
PowerVAR - PowerCom
March Newsletter April Newsletter
March Newsletter April Newsletter June Newsletter
Custom DAQ - DIO - Timer
Hardware Development Link
Contact a MasTec Engineer
Custom PAC - PLC
Hardware Development Link
Contact a MasTec Engineer
LabVIEW Courses
Learn LabVIEW - Experienced Developer
Contact a MasTec Engineer
LabVIEW Coaching on
MasTec's New Programming Techniques
Contact a MasTec Engineer
MasTec Projects
LabVIEW BooksLabVIEW Training
MasTec Projects
Three LabVIEW Books
"Three Methods to program more effectively in LabVIEW"Book 1 "Hidden Data", that is, cleaning up LV Program's by Removing Constants from Diagrams and putting them in Configuration Files for Loading at runtime.
This method does not use ini files but a far more robust LabVIEW centric method not seen in other literature. It also cleans up Diagrams and Self Documents.
Book 2 "Abstraction", that is, removing complexity in the top layer of a LabVIEW diagram by building Abstracted Message Driven LV Components.
This shows how to build Message driven (Test Verbs) Abstracted named (noun) Components that are safe & robust. It also leads to better cohension of course and no/low coupling.
All books are expansive, yet simple and this information is not often seen in other LabVIEW information. Using these methods will simplify design and development plus stabilise your programs and it even make installs easier. Updating and expanding then follows a standard pattern already in the program design.
Also these methods delineates Public and Private data clearly.
Once you have built a program using this LCOP method, if at any point you want to add or delete constants to any of your components cluster constants, maybe just add one more constant or truly expand the calibration to include a whole new sensor set or add more paths etc, just expand the type def for the constant data clusters and make the new entries. These entries can be any data type or grahical data type. Once this new type def cluster is saved, it will automatically appear in the Constant Data Editor TAB Selector . Enter your new data into the new constants and the editor will save this new set of constants for that cluster that has been expanded.
So only one diagram programming step adjusting the Type Def Cluster constant is required for this step. Next time you re/start the program, the expanded cluster with the new data will automatically appear in the section of your program. The wire from the file read and unflatten from string section will now contain the new constants.
You do not have to add or change anything in the diagram to make this happen. The program automatically knows the shape and structure of the new cluster loaded via the cluster local variable that will have expanded to include the new constants and this gives the shape to the file read and unflatten from string module.
Third Book
Book 3 "Real Time Cluster Constants Editor", that is, removed Diagram Constants that are loaded at Run Time from a config file, can now be edited, in situ, inside the Program /or its Component while it runs, allowing tuning of programs in Real Time. Changes to the Constants can also be saved back into their original configuration files at run time. This addition of the Real Time Editor removes the need to exit a compoent or program to edit constants.
To get your copy, send this email request to the MasTec LabVIEW Develop Laboratory in Northland NZ.
MasTec Training
"LabVIEW for Everyone"MasTec recently under took a 4 day Training course for 15 Academics, (Professors and Grad Students), at one of Oceania's largest universities.
The focus was on getting students to the point where they can undetake projects by the end of the course. A big ask. However, the focus was not on how to use all the bits inside LabVIEW to make software but the development of strategies to allow projects to be undertaken.
The MasTec Instructor has trained all over the globe and has taught over 2000 students.
He will also come to your site and do training with your LabVIEW team, using traditional or these new LabVIEW methods MasTec has developed.
Keep up with MasTec's latest LabVIEW Notes
MasTec ProjectsMasTec has several large projects on its books, spread out over about 3 years. There are gaps in this schedule.
MasTec is undertaking projects in legacy LV 6.1 systems still running in Windows XP.
Major projects are still undetaken in LabVIEW 7.1 running in Windows 7 32 Bit OS, very successfully. LabVIEW 7.1 is still the best LabVIEW ever released. Fast, efficient and stable. Win 7 32 bit OS will be available for some time. Most large corporations are still running Win 7 due to its excellent history
Other projects are using from LabVIEW 2010 up to the present version of 2015 SP1, which is good, but very processor hungry and slower. We only recommend I7s CPUs with this software with SSDs for the OS and LabVIEW.
Over the last year MasTec has completed 6 major projects in sites through out NZ. Several hundred hours of programming work has been completed, as well as many hundreds of commissioning, site management, and hardware installation.
All these projects involved LabVIEW at the core. However, many of these projects also include PACs, PLCs, Process Controllers, with peripherals like Servos, Actuators, VSDs, Water measurement and control, Hydraulic Control and other real world systems.
Announcement >>> Opportunity
The MD of MasTec has recently decided it is time to realign his life after 50 years of technology, to go horse riding with his wife and dogs Polly, Lilly and newly arrived Freddie.
If you have an interest in owning this important technology company, now is the time to act and start communcation for succession in early 2017.
Contact the Trustees
M2M, IOT,Industrial Wireless and EmbeddingXBEE Format Devices
What is XBEE??? read
Digi 900 MHZ Aus and NZ models read
MasTec is interested to hear from engineers who have an interest in 900MHZ wireless systems.You may have noticed that the NZ RF govt.nz group have opened the 900MHZ band to now cover from 915 to 928MHz ( with some restrictions)
We have 900MHZ wireless ready to goContact a MasTec Engineer
Why is XBEE important??? read
XBEE Land Page - XBEE Cellular read
Digi International has several 900MHZ wireless technologies ready to go for the NZ market.XBEE, Modem, M2M, Mesh and Long Distance
We are looking for clients who require OEM quantities of these products to make the RF Certification process feasibleContact a MasTec Engineer
Tripplite PDU Systems
Cabinet PDUs
Rack PDU Sytems
The TrippLite PDUs
Single Phase Simpler PDUs
Rack mount
for excellent monitoing and control
Single Phase more advanced PDUs
Rack mount with all the bells and whistles
for excellent monitoing and control
Racking Cabinet PDUs
Single Phase and Three Phase Hot Swap PDUs
Full Monitoring and Control
The TrippLite PDUs
TrippLite Inverter Chargers
Inverter ChargersCommercial and Medical Invertrers The TrippLite Sinewave Inverter Chargers
TrippLite has been making Inverter Chargers and Inverters since the early 1990s, both 110 VAC and 230 VAC units
Models 230 VAC 50 Hz
APSX1012SW > 12VDC 1000 watt APSX2012SW > 12VDC 2000 watt APSX3024SW > 24VDC 3000 watt APSX4048SW > 48VDC 4000 watt APSX6048VRNET > 48VDC 6000 watt Most Units are hardwired into systems, both AC inputs and Outputs. For DC Cables we recommend Welding Cable,
The TrippLite Quasi Sine Inverter Chargers
The TrippLite Quasi Sinewave Units have a 100% overload for starting heavy loads.
Models 230 VAC 50 Hz
APSX750 > 12VDC 750 watt APSX1250 > 12VDC 1250 watt APSINT2012 > 12VDC 2000 watt APSINT2424 > 24VDC 2400 watt APSINT3636VR > 36VDC 3600 watt HCRK Medical Inverter plus battery > 12 VDC 300 Watt
TrippLite UPSs
Single and Three Phase UPSsMedical Grade UPSs
The TrippLite UPSs
TrippLite made the first UPS for PCs in the 1980's. MasTec started selling TrippLite in 1993 and has thousands of units running in Oceania.
MasTec stocks a range of UPSs in NZ from <1000VA to 10KVA
TrippLite has 52 UPS Models for 230 VAC 50 HZ
Audio/Video Data Center Eco Energy-Saving Desktop Hospital/Medical Network/Server Hot-Swap
TrippLite is the leader in mid size Three Phase UPSs also.
TrippLite UPS Software is enterprise wide
The TrippLite Medical Grade UPSs
The TrippLite Medical Grade UPS is now the defacto UPS used in hospitals and medical sites in NZ and Australia.
They are also used extensively for free range medical equipment when patients move around in care services.
Models for 230/240 VAC systems.
Models for Medical Use include
Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outletBuilt-in isolation transformer with Faraday shield offers full isolation and removes common mode noise.
Health Care Brochure pdf Download
Health Care Medical pdf Download
Racking and Enclosures
The TrippLite Racking and Enclosures (over 100 models)
Enclosures from 2U to 28U heights
With locking doors and side panels, enclosed server rack cabinets are ideal for applications requiring physical equipment security at the rack level (as opposed to the room level). Ventilated doors encourage ample airflow from front to back. Server rack cabinets are popular choices for high-density data centers and server rooms.
Open Frame Racks
Open-frame server racks consist of mounting rails without sides or doors. Theyre typically used for applications that dont require physical security and dont need added airflow control.
An open-frame rack provides easy access and offers plenty of open space for cable management, making this solution ideal for network wiring closets and distribution frame applications with high-density cabling
Open racks have two or four mounting rails (called posts); 2-post racks generally require less depth but support less weight than 4-post racksThe TrippLite Racking and Enclosures (over 100 models)
Server Racks
wall-mount-network-switch-rack-enclosure
Choose an enclosed server rack for heavier equipment, hotter equipment and applications with higher wattages per rack
Special options include front doors with shatter-resistant clear acrylic windows, seismic ratings for earthquake zones and construction to NEMA IP54 standards for harsh environments
Data center racks organize IT equipment into standard-sized server cabinets for greater efficiency throughout the data center. Rack styles range from open-frame racks consisting of two or four mounting rails (called posts) without sides or doors to lockable enclosure cabinets with rails, front and rear doors and side panels.The height of a rack cabinet is measured in units designated by the letter U (each rack unit is 1.75 inches/44.45 mm) high; racks are available with capacities ranging from 2U to 58U
Choose floor-standing racks with rolling casters or wall-mount racks for applications where floor space is limited or extra security is important
Power Conditioners and Surge Suppressors2000 Watt Line Conditioner
10 Amp Euro 4 Surge Suppressor
The TrippLite AC Power Line Conditioners 1000 Watts
The LR1000 1000W 230V Power Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power. Built-in automatic voltage regulation(AVR) offers three levels of voltage stabilization that correct undervoltages as low as 168V and overvoltages as high as 278V back to regulated 230V nominal power. Providing optimum voltage conditions not only extends the life of your equipment, but also keeps your equipment working through brownouts and prolonged overvoltage conditions.
A 340-joule surge suppression rating meets the IEEE-587 standard for surge suppression(both categories A and B) and prevents spikes from inflicting damage, data loss or corruption and audio/video performance problems on your connected equipment. EMI/RFI noise filtering protects your AC line from disruptive electromagnetic and radio interference.
Just connect the detachable 2-meter NEMA 5-15P to C13 power cord to an AC power source, and plug up to four devices into the outlets. Two NEMA 5-15R and two C13 outlets accommodate a variety of connected components. An included UNIPLUGINT universal adapter allows most worldwide plug configurations to connect to the LR1000s C13 outlets. You can monitor incoming voltage levels using the three diagnostic LEDs on the front panel. The compact LR1000 fits comfortably into your computer or home theater setup.
The TrippLite AC Power Line Conditioners 2000 Watts
MasTec ships hundreds of these units each year for use in Commercial and Industrial Systems.
A higher power model than than the LR1000, the LR2000 2000W 230V Power Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power. Built-in automatic voltage regulation(AVR) offers three levels of voltage stabilization that correct undervoltages as low as 168V and overvoltages as high as 278V back to regulated 240V, 220V or 208V nominal power.
Euro 4 Surge bar is Metal Case with ground lugs for series noise control on AC Lines. Largest selling Industrial bar in the world.
Serial Server sMost Advanced Serial Server
Most Advanced Wirless Serial Server
The TrippLite Advanced Serial Server System
Tripp Lites B094-008-2E-V is the most advanced console / terminal server platform available today.
In a secure, desktop/rackmountable appliance, it offers an in-band and cellular management solution for serial console ports, servers, virtual servers, service processors, UPS & PDU's, environmental monitoring and more.
Certified for use with the largest Teleco Verizon's network, it features a built-in cellular modem that supports 4G LTE network speeds.
This 8 port serial console / terminal server enables system administrators to securely access and control their data centers and networks from anywhere in the world.
And this enterprise level unit is equipped with a built in cellular modem, dual Ethernet NIC, 4GB internal USB flash, and runs on Linux for scalability and reduced downtime.
The B094-008-2E-V offers advanced software features that surpass the requirements of even the most demanding applications.
These features include Network UPS Tools for UPS monitoring, PowerMan for integrated PDU and RPC functions with in session hotkey support, Pattern match alerting,
Open access to the Linux shell for scripting, heartbeat monitoring with automatic fail-over,
Cisco pinouts and much more.
Assembled in the USA.
The TrippLite Advanced Serial Server System
Built in cellular modem for wireless access
Certified for use with Verizon's network
Supports 4G LTE network speeds
4GB local FTP/TFTP storage for device configuration files
IPsec VPN support
Configured to use standard Cat5e/6 patch cable when connecting to Cisco devices
Tripp Lite's console servers all use an embedded FIPS 140-2 OpenSSL cryptographic module that has been validated to meet the FIPS 140-2 standards and has received Certificate #1051.
When using SSH, HTTPS or SDT Connector to connect to any service on the console server while running in FIPS mode, they will be utilizing the embedded FIPS compliant module. In order to connect using any of the protocols, you must use a cryptographic algorithm that is FIPS approved or it will fail.
Features 4GB internal USB flash
Secure Shell (SSH V2 and V3)
TACACS+ , RADIUS, LDAP and Kerberos authentication
Local authentication
System event syslog
SSH port and IP forwarding support
IP packet filtering
Break over SSH support
Port triggers with SNMP and email alerts
Offline data logging (Syslog, NFS, CIFS)
Online data buffering and logging
Multiple users per port (with port sniffing)
Telnet/SSH/Raw TCP connect
RFC 2217 - Port Redirection
Integrated AJAX serial console and system terminal via web interface
Native IPMI 1.5 and 2.0 (RMCP/RMCP+) support for BMC and service processor access and control
Service processor access (IPMI, ILO, LOM and more)
Access to KVM built in to service processors (DRAC, RSA)
Limit user access by LAN device and SDT service for that device
Port triggers with SMNP and email alerts for all tunnel traffic
Each gateway can port forward to an unlimited number of locally networked hosts (computers, routers)
Embedded DHCP server for management LAN devices
Network UPS Tools for UPS Monitoring and Management
PowerMan for PDU and RPC Management
Command Line interface (Linux Shell)
NAGIOS distributed monitoring
Linux with source code access
Constructed of heavy-duty steel housing
Desktop or rackmountable with included mounting brackets
Keyspan ProductsKeyspan by Tripp Lite
Easy Presenter Wireless Remote Control,
White, 60-ft. Range
Keyspan by Tripp Lite
Presentation Pro Wireless Remote Control,
Black, 100-ft. RangeThe TrippLite Presentation Products
Ideal for large meeting rooms or auditoriums to give lecturers, trainers or presenters wireless control of PowerPoint, Keynote and other presentation programs that use PowerPoint keystrokes up to 100 ft. away.
Designed for PowerPoint, Keynote and other programs that use PowerPoint keystrokes
Ideal tool for presenters and lecturers
100 ft. RF range covers large meeting rooms and lecture halls
Plug and Play, no software to installVolume, 2-button mouse and laser pointer controls
More ModelsThe TrippLite Presentation Products
RF Connectivity: Works to 60 ft or more -- even through walls and furniture
Laser Pointer: Highlight details of your presentation with ease
Audio Control: Volume and mute buttons control sound
Plug & Play: No software to install, just plug it in and it works within seconds
Travel Pouch: Convenient for carrying the remote and receiver
Buttons on the Remote:
Launch presentation (F5)
Slide forward
Slide back
Black screen
Quit presentation (ESC)
Volume up
Volume down
Mute
Laser pointer
Button names - associated keystrokes - actions:
Previous Slide (Left Triangle Button) - Page Up - Moves to previous slide in slideshow
Next Slide (Right Triangle Button) - Page - Moves to next slide in slideshow
Volume Up (Up Triangle Button) - System Volume Up Key - Raises the volume level on your computer
Volume Down (Down Triangle Button) - System Volume Down Key - Lowers the volume level on your computer
Mute (Speaker Button) - System Mute Key - Mutes all sounds on your computer
Black Screen (Black Square Button) - B - Blacks screen during a slideshow. Press again to un-black screen
F5 - F5 -Starts slideshow mode. NOTE for Mac Users: Install optional software to enable F5 to start slideshow mode in PowerPoint/Keynote (See "Help & Downloads" tab)
ESC - ESC - Stop slideshow
Laser Button (Red Circle Button) - None or n/a - Press to turn on laser pointer
Surface Pro KitsSurface Pro Accessories 4K HDMI
The TrippLite Laptop and Surface Pro Accessories
The P137-GHDV-V2-K 4K Video and Ethernet 2-in-1 Accessory Kit expands the capabilities of your Microsoft® Surface® or Surface Pro by adding Gigabit Ethernet access and an external DVI, VGA or 4K HDMI monitor. These two lightweight, low-profile adapters fit neatly into your backpack or laptop bag, so you can use this Microsoft Surface accessory kit anywhere you go.
For displaying videos, spreadsheets, documents and presentations on a larger screen, the Mini DisplayPort to DVI/VGA/HDMI adapter has separate DVI-D, HD15 and HDMI female ports for connecting your Surfaces Mini DisplayPort to a DVI, VGA or HDMI monitor, television or projector. It supports video resolutions up to 1920 x 1080 (DVI-D); 1920 x 1200, including 1080p (HD15); and 4K x 2K Ultra High Definition up to 3840 x 2160 (HDMI) at 24/30 Hz. It also supports 36-bit Deep Color (12 bits per channel). Only one display can be connected at a time.
The USB 3.0 SuperSpeed to Gigabit Ethernet adapter allows your Surface to access a 10/100/1000 Mbps wired network without an internal Ethernet card. It achieves USB 3.0 data transfer speeds up to 5 Gbps without compromising signal quality. It complies with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards and supports IEEE 802.3az Energy Efficient Ethernet, as well as full- and half-duplex operations, suspend mode and remote wakeup via link-up, and magic packet.
The TrippLite Laptop and Surface Pro Accessories
Features
Mini DisplayPort to DVI/VGA/HDMI Adapter
?Connects your Surface to a DVI, VGA or HDMI display
?DVI-D port supports video resolutions up to 1920 x 1080 (1080p)
?HD15 port supports video resolutions up to 1920 x 1200, including 1080p
?HDMI port supports UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 Hz
?Supports 36-bit Deep Color (12 bits per channel)USB 3.0 SuperSpeed to Gigabit Ethernet Adapter
?Connects your Surface to a wired Ethernet network
?Ensures true 10/100/1000 Mbps network speeds
?Reaches USB 3.0 data transfer speeds up to 5 Gbps
?Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3az standards
?Supports full- and half-duplex, suspend mode and remote wakeup via link-up, and magic packetPlug and Play Operation
No external power supply needed
Small enough to carry easily in laptop bag or backpack
Compatible with Microsoft Surface and Surface ProDocking Stations Also.
ODM/OEM Purchases All Prices are exclusive of NZ GST Spot Buying
© MasTec Ltd Phone 64 9 273 4200 Fax 64 9 273 9500 info@mastecnz.co.nz
© MasTec Ltd