New Distribution
_

_

_
 
Instrumentation Newsletter - September 2020
_

Industrial Slim Type 5-port
Unmanaged Ethernet Switch

8-Port Slim Industrial Ethernet Switch, w/8*10/100Tx; EOT: -40°C~75°C
with Conformal Coating

Unmanaged 5-port Industrial 10/100/1000
Base-T Ethernet Switch


IIOT Ethernet Switches

The IIoT will be the revolution in the manufacturing industry. It can greatly improve connectivity, efficiency, scalability, time and cost saving for the industrial organizations.

The most important thing, IIoT networks of intelligent devices provides industrial organizations to break open data silos and connect all of their data and processes from factory to offices. Trough IIoT data analyzing also helps business development to clarify how their enterprise is doing, which makes them to do the better decisions.

The IIoT is considered to be an up-going trend in the future.

MasTec carries a broad range of Industrial Grade managed and unmanaged Ethernet Switches and Fiber Switches.

Between the six manufacturing companies listed here, you will find exactly what you require for your industrial site and many IT sites also.

If you need POE we have a growing selection.

If you need Ethernet to Modbus gateways, we can provide quite a range to choose from.

Many of our Wireless Routers and Gateways also container ethernet switches.

 

 

 

 

 

 

 

 

_
Talk to a MasTec Sales
Engineer
_


Instrumentation August 2020

Industrial 8-Port 10/100/1000T Wall-mounted Gigabit PoE+ Switch
Specially built for IoT and IIoT applications, PLANET cutting-edge Industrial 8-Port Wall-mounted Gigabit PoE+ Switch, WGS-818HP, featuring VLAN isolation and 250m PoE extension, supports space-limited installation with its unique compact flat-type casing design


16FE Managed Ethernet Switch


Epsilon-24000 26-Port Gigabit Ethernet Switch

Let the world's smallest Industrial Security Switch protect your IIoT network!

_
 
Power Newsletter - September 2020
_

Compact and completely modular design
High effectivity in all operation modes
Ability to use an existing liquid cooling system directly
Optional matched liquid-to-air cooling unit TC.LAE available
Possibility of upgrading to systems of up to 1 MVA
High level of system dynamics, = 5 kHz modulation bandwidth
Non-restrictive capability of refeeding in the Q4 operation mode
Possibility of operating as an autonomous 4-Q and 3-phase quasi-analogue amplifier
Possibility of “Hardware-in-the loop”-operation (HIL mode)
User friendly application software with pre-configured test patterns
Possibility of integrating into a complete SAS simulation and test system
Galvanic isolation available as an option without derating the simulator port data
Three different operation modes:
a) Programmable Grid Simulator
b) Remote operated 4Q AC voltage amplifier
c) Electronic AC-load featuring programmable RLC load impedance

By combining Regatron DC power supplies with a grid simulator, a complete model of a Smart Grid can be built up. Thus, intensive studies on the dynamic behaviour of grids are made possible.
Within such a system, TopCon unidirectional DC power sources take over the role of “additive” energy sources like wind-, solar-, hydro- and biological power generators as also of fuel cells and on. TopCon bidirectional DC power sources are best suited for the role of electrical power storage elements as also as simulators for power consumption.
As a third element, the grid tied path may be equipped with TC.ACS 4-quadrant Grid Simulator, which is able to simulate various public grid situations up to the ultimate situation of a so-called “Islanding Situation”.

Relevant industry/education sectors:
Technical universities
Electrical energy providers
Electrical engineering R+D
Additive energy” R+D institutes
Specialized electrical system manufacturers

 

High Power Simulators & AC and DC Supplies

REGATRON has researched, developed and sold programmable power supplies and power electronics for 50 years. Regatron products bear the Swiss characteristics of quality, accurateness and creativity.

REGATRON was first on the world market introducing all-digital fully programmable electrical Power Supplies and has attended the market since many decades very closely. The product portfolio therefore is well matched to the market’s requirements and offers among other features one prominent quality: The modular power topology.

Ingenious data link techniques allow not only to operate individual units in parallel in order to extend the power system up to MW levels, but even mixed-mode of series connected units in parallel arrays and vice-versa is possible. By this, a maximum flexibility with respect to changing requirements and future expansion is given.

 

REGATRON Steps Ahead with a Multifunctional HMI for TC.ACS Grid Simulator Systems
Innovative touch-screen technology offers you the entire grid simulation data on screen at a glance. It has never been easier to keep track.

Read More

Ever Changing Test Requirements in Your Laboratory?
With only a few DC and AC power supply units from REGATRON, a large number of tests can be performed to cover many different applications.
Do you have requirements in the field of DC and AC simulation? Do you combine DC simulation with grid simulation? Do your power or voltage / current ranges vary considerably?

With only a few DC and AC power supply units from REGATRON, a large number of tests can be performed to cover many different applications.

 If you would like to contact us about any of these products, feel free to email us.

TopCon Quadro Series Programmable DC power supply. The versatile unidirectional simulation and testing solution!

Compact design with integrated EMI filters
Constant voltage (0 – 100 %), constant current (0 – 100 %) and constant power operation (5 – 100 %)
Internal resistance simulation
Graduated product line: 0...52 VDC up to 0...1200 VDC; higher voltages per series connection up to 1500 VDC
Power categories of 10, 16, 20 kW and 32 kW are available for each nominal DC input voltage
Modular concept for easy power increase: Parallel, series, matrix or multiload master-slave operation
High efficiency by modern medium frequency conversion technology. Primary switched
DC input galvanicly isolated. Full digital control and regulation.
TopControl installation file, LabVIEW® and C/C++ C#/.NET API (DLL file) are included in the scope of delivery.
CE conformity
Swiss made: Developed, manufactured and tested in Switzerland by Regatron AG.

Under the control of specialized REGATRON Battery simulation software, TC.GSS is the best choice to feed battery alimented Drive Train Systems. The behaviour of different battery types as also variation of relevant battery parameters such as ageing, temperature and internal cell resistance may be varied within wide ranges and allow therefore the simulation of a wide variety of operational conditions.

Relevant industry sectors:
Automotive drive tests
Drive train development
Drive technology R+D
Battery cell and stack development and tests
Battery and stack cycle tests
Electrical storage system tests (capacitors, EDLC’s, batteries)
Airborne on-board supply system tests
Marine on-board supply system tests and simulation

 

Also View ITech High Power Supplies

Power August 2020
 

_
Medical Newsletter - September 2020
_
Health care is a vitally important aspect of everyone’s life. It is a constantly evolving industry with huge pressures driving its development. The gathering and communication of information is a key player in the advancement of medical science and technology. Sending this information wirelessly allows for greater freedom of movement, reduces clutter and removes surfaces capable of transporting bacteria and viruses.  

Wearables
With the explosion of mobile computing, first precipitated by smart phones, health care monitoring and medical diagnosis is now open to all. Information about a persons health can be collected by affordable wearables and then transmitted to the cloud where big data algorithms utilise it for scientific research and-or the wearers personal benefit.

For most wearables the limiting factor of any design is space. Which is why LM provides the Bluetooth® low energy LM936 System In Package powered by an ARM Cotrex-M3:

The LM936 is a compact, highly integrated Bluetooth® low energy system-in-package (SiP) module. The LM936 SiP includes an embedded low energy antenna, 24 MHz clock, and 512 Kb EEPROM, so only a minimal set of external components is needed to create a standalone low energy device.

FEATURES

Bluetooth® v4.1 specification
14 mA Current Consumption (at 0 dBm Tx Output Power)
IC Antenna Onboard (Peak Gain = 0.5 dBi)
9 dBm Tx Output Power (Max) and -92 dBm Rx Sensitivity
Over-the-Air Upgrade (OTAU) available
Application Firmware Support
IoT Applications available including Serial over GATT,
Eddystone™ Beacon and Cloud Sensor & Cloud Collector
Fully integrated module with no additional components requiredI2C and UART
9 digital and 3 analogue I/O (10-bit ADC)
Wake-up interrupt and Watchdog timer
4 PWM channels
22mm x 10.11mm x 2.50mm
SMT Side and Bottom Pads for easy production
RoHS, REACH and WEEE Compliant Solution

     

Bluetooth Serial Port Profile
LM’s Bluetooth® to Serial adapters have been used within health care to enable wireless RS232 and RS485 cable-replacement solutions for almost a decade now.

The resilient frequency-hopping nature of Bluetooth® and the pass-through and fully direction independent aspects of our LM048 and LM058 Bluetooth® serial adapters have allowed customers to utilise them to carry both legacy and modern serial protocols.

The LM4xx series of serial modules have also been used to extend the connectivity of existing products where a more integrated solution was required. For many of these projects LM has provided firmware modifications to facilitate the particular requirements of an existing system.

FEATURES

Constant updating of Firmware for global interpolority and compatibility
Multiple power options, 9th Pin, AC mains PSU and USB power cable
CSR BC04 EDR 2.0+Chipset
Windows configuration software
PSU and gender changers supplied
Growing and improving AT command set
Approved product by some of the worlds leading datalogger manufactures
600 Meter range when supplied with the LM057 600 Meter antenna
Firmware upgradeable

 If you would like to contact us about this products, feel free to email us.

Medical August 2020

_

__
 

AC and DC Loads and more

 

Lithium 12 Volt 100Amphr Batteries


Xbee Wireless Comparison Sheet
 

  

 
 


All things Power UPS Medical PDU USB Power



Signal conditioning, data acquisition, and data communication products

 

High Powered AC and DC Power Supplies


DAQ USB, Ethernet, WiFi and Buses

 

Industrial IIOT and Automation

 
 

Medical Grade Power

 

Loggers

IIOT > EPIC Linux Real Time Edge Computer
 

Programmable Instruments and Power Sources



IIOT Bluemix IO

 

 
Instrumentation Website
 
Medical Tech Website
 
Power Product Website

 Subscribe
MasTec's Newsletters has 5K readers

5,000+ clients receive our eNewsletters monthly

 Technology Chat
Do you need some consulting time?

A short chat may save a lot of time and money

Contact a MasTec Engineer

Custom LabVIEW Development
Research & Development Projects

LabVIEW Code Upgrading
From LV 6 to Present

Custom LabVIEW Development
Modbus ASCII & RTU & TCP

Custom LabVIEW Development
RS-232 & RS-485 Instruments

Spot Buying
ODM/OEM Purchases

All Prices are exclusive of NZ GST
Disclaimer
Phone 64 9 273 4200 / Fax 64 9 273 9500

© MasTec Ltd 1997- 2020